Chainsaw Repair

Hello gents,

I need an IPL and Workshop Manual for a Partner K700 demo saw. 


On Barrett's site I found an IPL for the Husqvarna branded K650, but not the 700 (and no mention of Partner........although I understand that these machines are actually Husqvarnas, and were just branded as Partners here in the US). 

From what I've gathered from ebay listings (which aren't always correct), the P/C for the 650 and 700 are the same.  Don't know for sure however. 

I'll most likely be putting an aftermarket P/C on this machine and either keeping it or sending it on down the road.  Thanks in advance!

I think the cut-off saw is timed for a lower rpm than the chainsaw versions to keep from blowing up the blade?

Look in your SBC Global

Got it!  Thanks Jim.  Looking at the SM.........it seems this model has a governed carb (like older machines) while the larger K950 and K1250 machines have the limited ignition.  That's interesting, as my machine has a green coil..........and I always thought those were limited.  Could be that this machine has a limited coil too.....