Author Topic: 2150 piston ring  (Read 2241 times)

0 Members and 0 Guests are viewing this topic.

Offline huckleberry

  • pruner
  • *
  • Posts: 2
  • Karma: 0
2150 piston ring
« on: June 21, 2013, 08:18:58 pm »
After pulling the cylinder off of the saw, i accidentally broke my piston ring. got a new one at the local repair shop. reassemble the saw and have very little compression. saw will fall from the starter recoil under its own weight. i tore the saw back down and put the ring alone into the cylinder and there is in excess of 3mm of gap in the ring ends. is this normal or is the ring too small. thanks

Share on Bluesky Share on Facebook


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 2150 piston ring
« Reply #1 on: June 21, 2013, 08:46:08 pm »
The spec is 1 mm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 2150 piston ring
« Reply #2 on: June 21, 2013, 08:49:15 pm »
http://www.ebay.com/itm/Piston-Ring-fit-JONSERED-49-SP-52-E-2050-2054-EPA-2149-2150-GR-50-CS-2150-/170925497483?pt=LH_DefaultDomain_0&hash=item27cbf41c8b


EDIT: This number is wrong for the original poster's application. This number is for the 44mm bore!!!!!
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline huckleberry

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Re: 2150 piston ring
« Reply #3 on: June 22, 2013, 07:49:23 am »
i have read that some of these saws came with a 44mm cyl and some with a 45. mine has 45L marked on top. could this be where we are going wrong. nervous about ordering the ebay one as it doesnt mention size....

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24232
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2150 piston ring
« Reply #5 on: June 22, 2013, 12:16:27 pm »
Jim is the jonsered 2150 the husky 350?   

That would explain what I am reading on the 44mm 45mm bores

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway
Re: 2150 piston ring
« Reply #6 on: June 22, 2013, 03:00:47 pm »
Jim is the jonsered 2150 the husky 350?   

That would explain what I am reading on the 44mm 45mm bores

Yes.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181
Re: 2150 piston ring
« Reply #7 on: June 24, 2013, 08:46:38 pm »
FWIW you can get about any size ring you want from Northwood saw ,cheap .Takes maybe 3 days to get it .

It's pretty simple ,you order the stuff on line and then if you want phone in the credit card number if you don't trust the internet which I personally do not .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24232
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 2150 piston ring
« Reply #8 on: June 24, 2013, 09:05:18 pm »
Northwood Saw is were I get my cabers too.  Just make sure you get the cabers and read listing close. I have used the others with no problems too.

http://northwoodsaw.com/store/

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: 2150 piston ring
« Reply #9 on: June 24, 2013, 09:33:09 pm »
If you get Meteor or Cabers from the foreign countries across the Atlantic, it usually takes close to a month to get them.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
1054 Views
Last post December 04, 2013, 10:08:33 pm
by SELLSEVERYTHING
12 Replies
1557 Views
Last post January 05, 2014, 10:21:27 pm
by jmester
14 Replies
1944 Views
Last post August 17, 2014, 01:31:29 pm
by Jason K
0 Replies
635 Views
Last post June 05, 2015, 07:19:35 am
by mdavlee .
13 Replies
2714 Views
Last post December 25, 2015, 02:18:56 pm
by wudpirat
25 Replies
2150 Views
Last post November 24, 2016, 12:52:15 am
by oldpro
0 Replies
679 Views
Last post October 26, 2016, 02:37:29 pm
by Cut4fun
10 Replies
1804 Views
Last post October 28, 2016, 04:23:19 pm
by Cut4fun .
10 Replies
2438 Views
Last post November 27, 2016, 08:11:21 pm
by Cut4fun .
2 Replies
1541 Views
Last post November 11, 2021, 07:13:32 am
by Cut4fun .