Author Topic: Diagnostic software  (Read 1601 times)

0 Members and 0 Guests are viewing this topic.

Offline J.Walker

  • 4 cube
  • **
  • Posts: 51
  • Karma: 16
Diagnostic software
« on: January 20, 2014, 08:14:10 am »
Will the Husky diagnostic software work on the Jonsered saws?

Share on Facebook Share on Twitter


Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Diagnostic software
« Reply #1 on: January 20, 2014, 09:11:21 am »
It's hard to imagine a reason that it shouldn't - but I don't actually know.

I'm sure that Spike will know for sure though!

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Diagnostic software
« Reply #2 on: January 20, 2014, 03:43:06 pm »
Jack, I would bet on it being the same too. Anyhow here is the jonsered numbers.  583897101 DIAGNOSTIC TOOL KIT
REDNECK Saw Repair Getter Done

Offline tlandrum

  • 4 cube
  • **
  • Posts: 31
  • Karma: 6
Re: Diagnostic software
« Reply #3 on: January 20, 2014, 09:30:26 pm »
they are in deed the same tool. I have started keeping them in stock for people to buy. ive sold several of them now.generally they are 125 shipped in a flat rate box
www.wickedworksaw.com
if your looking for a new saw ,parts or accessories give me a call. I offer woods porting services as well as race saw builds.

Offline J.Walker

  • 4 cube
  • **
  • Posts: 51
  • Karma: 16
Re: Diagnostic software
« Reply #4 on: February 23, 2014, 06:56:05 am »
One tank of fuel.



.



Offline mweba

  • Piped Saw
  • *****
  • Posts: 390
  • Karma: 53
Re: Diagnostic software
« Reply #5 on: February 23, 2014, 08:46:50 am »
DO you have the current software pack?  If not, let me know.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Diagnostic software
« Reply #6 on: February 23, 2014, 01:53:08 pm »
Does the Jonsered number correspond to the Husqvarna number?
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline J.Walker

  • 4 cube
  • **
  • Posts: 51
  • Karma: 16
Re: Diagnostic software
« Reply #7 on: February 24, 2014, 08:03:30 am »
Does the Jonsered number correspond to the Husqvarna number?

The part number for the software?

When you plug in a saw all the info comes up.



.

Offline J.Walker

  • 4 cube
  • **
  • Posts: 51
  • Karma: 16
Re: Diagnostic software
« Reply #8 on: February 24, 2014, 10:34:46 am »
This diagnostic software pack is Husky #576 6923-01

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Diagnostic software
« Reply #9 on: February 24, 2014, 10:39:38 am »
You happen to know the cost and is that PN just the software or software and the associated cables? I purchased that PN a few months ago from parts tree and IIRC the retail cost was 407 and my cost was 360 and change. That was for the whole mess, cables and all. I can't figure out how the poster can sell it for $125 delivered, must get a much much better discount than I do.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
157 Views
Last post December 02, 2012, 09:11:48 pm
by Cut4fun .
3 Replies
308 Views
Last post December 06, 2014, 05:11:50 pm
by Nathaniel Vansickle
9 Replies
888 Views
Last post July 24, 2016, 01:54:18 pm
by Legeance