Author Topic: Husqared 3171  (Read 283 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Husqared 3171
« Reply #20 on: December 20, 2014, 05:39:15 pm »
Very cool.  Maybe I'll do the same with a 385XP carcass and some 2186 parts.  Hmmm.....
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Chris_Elliott

  • 3 cube
  • *
  • Posts: 12
  • Karma: 2
Re: Husqared 3171
« Reply #21 on: December 20, 2014, 10:08:24 pm »
Very cool.  Maybe I'll do the same with a 385XP carcass and some 2186 parts.  Hmmm.....

Do IT DO IT!

Or send them to me and I'll do it  ;D

Offline Chris_Elliott

  • 3 cube
  • *
  • Posts: 12
  • Karma: 2
Re: Husqared 3171
« Reply #22 on: December 20, 2014, 10:09:36 pm »
Looking at that 372 with the red tank and green cap, I think I'm kinda glad my plastics are faded, dirty and scratched. That one REALLY stands out!

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Husqared 3171
« Reply #23 on: December 21, 2014, 06:30:08 am »
Looks good. I kinda like the mongrels for some reason.... :-)
Ron