Author Topic: Jonesred 2166 turbo bar oiler (Read 72 times)

Fshoup2010 · « **on:** February 03, 2018, 01:27:36 pm »

Hey people I have the CS2166 it is 3 years old just out of warranty, was cutting wood the other day and the blade started to smoke super bad. Shut the saw off took it to the barn and tore it down so I could see where all the bar chain oil was coming from. It has the 24” bar and chain, when I checked the adjustment screw it was all the way out 5 1/2 turns adjusted it back to the recommended turns out. But I still can’t get this thing from poring the bar oil out it’s bad enough my blade smokes when I cut wood with it. All seals appear to be good what am I missing any input will be greatly appreciated. Jonesred is no help now that it is out of warranty.

mdavlee . · « **Reply #1 on:** February 03, 2018, 05:47:18 pm »

Where is the oil running out at?

Fshoup2010 · « **Reply #2 on:** February 03, 2018, 05:56:59 pm »

It is coming out of the oil tube by the chain but it is just pouring out no matter how tight I make the adjustment screw

Cut4fun . · « **Reply #3 on:** February 03, 2018, 09:31:43 pm »

Manual

The oil pump is adjustable. Adjustments are made by
turning the screw using a screwdriver or combination
spanner. The machine is supplied from the factory set to
1 turn open. Turning the screw clockwise will reduce the
oil ﬂow and turning the screw anti-clockwise will increase
the oil ﬂow.
Recommended settings:
Bar 16"-18"
2 turns from the closed position.
Bar 20"-24":
3 turns from the closed position.
Bar 28" - :
4 turns from the closed position.

Chainsaw Repair

News:

Author Topic: Jonesred 2166 turbo bar oiler (Read 72 times)

Fshoup2010

Jonesred 2166 turbo bar oiler

mdavlee .

Re: Jonesred 2166 turbo bar oiler

Fshoup2010

Re: Jonesred 2166 turbo bar oiler

Cut4fun .

Re: Jonesred 2166 turbo bar oiler

Related Topics