Author Topic: Jonsered 525 (Read 1090 times)

joker · « **on:** March 17, 2014, 09:27:17 pm »

Please somebody help me! Can some one tell me, does fit any other cylinder on Jonsered 525? Thanks for your answers. Gretings

P.s. Sory for bad english!

SawTroll · « **Reply #1 on:** March 24, 2014, 12:54:18 pm »

Bump - this is a really hard question, as that saw is quite uncommon and was built in an ususual way (horisontal split magnesium case). There were no counterparts from other brands, even though they were made at the Partner factory. Other saw in the same "family" were the 520 and the 535, but the 2051/2054 and 2055 also had a similar type of case.

I have no idea if the cylinders from any of those can be used though?

SawTroll · « **Reply #2 on:** March 25, 2014, 11:13:43 am »

I just read on another forum that both the 510 and the 520 used the same piston as the 525 (not really a surprice).

tassin85 · « **Reply #3 on:** March 27, 2014, 03:48:10 pm »

If you find the solution please tell us, i have got 2 525 with old pistons.
Is it possible to find an after market cylinder that fits the 525?

Spike60 · « **Reply #4 on:** March 27, 2014, 04:49:23 pm »

Top ends from a 450 or 455 will also fit.

tassin85 · « **Reply #5 on:** March 27, 2014, 04:51:04 pm »

Yes but where to find new?

Spike60 · « **Reply #6 on:** March 28, 2014, 10:32:24 am »

Tilton actually still has some of the 44cc cylinder kits from the 455; part number 503104203. Price is about $200.

Don't see a location for you, but I'm guessing outside the US? I'm unable to help you, but maybe someone else would be able to.

SawTroll · « **Reply #7 on:** March 28, 2014, 11:34:16 am »

Quote from: Spike60 on March 27, 2014, 04:49:23 pm

Top ends from a 450 or 455 will also fit.

Not a surprice, but those do of course make less power, at just 44cc.

leec · « **Reply #8 on:** December 19, 2015, 06:30:17 pm »

Quote from: tassin85 on March 27, 2014, 03:48:10 pm

If you find the solution please tell us, i have got 2 525 with old pistons.
Is it possible to find an after market cylinder that fits the 525?

Chainsawr and liredbarn both have AM pistons

leec · « **Reply #9 on:** December 27, 2015, 03:22:38 pm »

Quote from: Spike60 on March 27, 2014, 04:49:23 pm

Top ends from a 450 or 455 will also fit.

Yes I just replaced the piston in my 525, after market from Chainsawr. Seems to work fine.

Chainsaw Repair

News:

Author Topic: Jonsered 525 (Read 1090 times)

joker

Jonsered 525

SawTroll

Re: Jonsered 525

SawTroll

Re: Jonsered 525

tassin85

Re: Jonsered 525

Spike60

Re: Jonsered 525

tassin85

Re: Jonsered 525

Spike60

Re: Jonsered 525

SawTroll

Re: Jonsered 525

leec

Re: Jonsered 525

leec

Re: Jonsered 525

Related Topics