« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: Jonsered 2083 project  (Read 1231 times)

0 Members and 0 Guests are viewing this topic.

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 166
  • Karma: 21
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #20 on: March 06, 2015, 01:21:37 pm »
I think I seen some of those on the 62- series also.  I have all the parts & half disassembled - hoping to finish it this weekend.
Logged

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 62
  • Information collector
  • Location: Troms, North Norway
Re: Jonsered 2083 project
« Reply #21 on: March 06, 2015, 04:19:50 pm »
Quote from: Tractorsaw1 on March 06, 2015, 01:21:37 pm
I think I seen some of those on the 62- series also.  I have all the parts & half disassembled - hoping to finish it this weekend.

Lots of Jonsereds had those in the 1970s, but my 1970 vintage 621 didn't - or rather doesn't, as I didn't own it from the outset (my FIL did). The material it is made from fits the time though, so it isn't a much newer replacement, and the design fits the oil cap..
Logged

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 166
  • Karma: 21
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #22 on: March 06, 2015, 04:45:39 pm »
ah troll correct as usual.  Here is another example, I had seen some on ebay, must be the 630's I seen them on such as this example.  I don't know could be an old aftermarket replacement.  :)
Logged

Offline David Young

  • 5 cube
  • ***
  • Posts: 131
  • Karma: 13
Re: Jonsered 2083 project
« Reply #23 on: April 03, 2015, 02:18:31 pm »
if you need parts I got a bunch hit me up.

David
Logged
Like Like x 1 View List

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 166
  • Karma: 21
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #24 on: April 16, 2015, 01:21:37 pm »
Hey Thanks David, I think I have everything I need - except time  :-\
Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3694
  • Karma: 133
  • OHIO REDNECK
Re: Jonsered 2083 project
« Reply #25 on: April 16, 2015, 01:53:32 pm »
Quote from: Tractorsaw1 on April 16, 2015, 01:21:37 pm
Hey Thanks David, I think I have everything I need - except time  :-\

I find I have even less time to mess with projects now days too. All setting on the back burners.

Never can get to my own stuff right now with everyone fired up after winter to get cutting. 
Logged
REDNECK Saw Repair

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 314
  • Karma: 96
  • Location: Ulster County, NY
Re: Jonsered 2083 project
« Reply #26 on: April 17, 2015, 06:57:08 am »
I'm in a similar boat Kevin. Time to mess with any of my own stuff at the store won't be happening for months. My own projects get done in my workshop at home. Similar things obviously, but completely different to be working on my own stuff with music playing, a couple of beers and NO phone calls or people walking in. And, if your own projects don't get done, nobody complains. LOL
Logged
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395
Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Jonsered 2083 project
« Reply #27 on: April 17, 2015, 02:25:48 pm »
I don't get much chance to work on my own stuff either.   More saws belonging to the park and friends keep coming in.  One leaves and three come in.  Not going to get any of my projects done any time soon......
Logged
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Like Like x 1 View List

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 314
  • Karma: 96
  • Location: Ulster County, NY
Re: Jonsered 2083 project
« Reply #28 on: April 17, 2015, 04:19:32 pm »
Quote from: Eccentric on April 17, 2015, 02:25:48 pm
  One leaves and three come in. 

That sounds mighty familiar.
Logged
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395
Agree Agree x 1 View List

Offline David Young

  • 5 cube
  • ***
  • Posts: 131
  • Karma: 13
Re: Jonsered 2083 project
« Reply #29 on: April 18, 2015, 12:02:58 pm »
Sorry guys. I don't have spare time either. I had a deal on some roundtoit's but of course deal fell through. They are under high demand everyone is looking to get roundtoit's

If any one finds a pile off them let me know.
Logged
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
Jonsered 2083

Started by Cut4fun . « 1 2 ... 10 11 » Jonsered

101 Replies
6632 Views 		Last post February 19, 2017, 03:01:25 pm
by Cut4fun .
19 Replies
1241 Views 		Last post September 04, 2013, 01:15:20 pm
by 660magnum
27 Replies
604 Views 		Last post February 22, 2017, 07:26:04 pm
by Cut4fun .
12 Replies
681 Views 		Last post December 06, 2013, 02:16:11 pm
by David Young
11 Replies
706 Views 		Last post June 08, 2014, 03:53:42 pm
by Cut4fun .
5 Replies
234 Views 		Last post August 24, 2014, 10:40:36 am
by Cut4fun
28 Replies
346 Views 		Last post February 28, 2015, 07:54:28 pm
by SawTroll
38 Replies
604 Views 		Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
1 Replies
198 Views 		Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
0 Replies
20 Views 		Last post February 27, 2017, 10:00:02 pm
by blueberrymuzik