Author Topic: Jonsered 2083  (Read 8525 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #80 on: February 26, 2015, 08:21:21 pm »
Nice I was looking at 28" bars the last 2 days. Man what a spread on drive link counts. 90dl 91dl 92dl 93 dl bars.  I was getting dizzy in my search.   
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #81 on: February 26, 2015, 08:48:08 pm »
I have two 28" bars one I used on the 475 and the other for the 505's or 2083.   I would have to look at them again to get the drive count.  Really I should see if they are both the same.
PP 505, 475, 445.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: J-Red 2083
« Reply #82 on: February 27, 2015, 05:09:40 am »
Very nice! Love those saws!
Ron

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #83 on: February 27, 2015, 11:40:34 am »
Nice I was looking at 28" bars the last 2 days. Man what a spread on drive link counts. 90dl 91dl 92dl 93 dl bars.  I was getting dizzy in my search.   

And they all are shorter than 28". I don't think a single 28" bar actually is 28".....

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #84 on: February 27, 2015, 11:44:51 am »
I bought this saw about 2 years ago and then have never got around to using it yet.   As you can see it is in very nice condition.    I plan on trying it out but other things just kept me busy but maybe this summer.
I do not believe I have ever shown it on here before so I took a couple of pics.



Nice - and it looks like a real 82.4cc 2083, and not the 2083II (that really is a late production 76.5cc 2077)!

What is the serial number?

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #85 on: February 27, 2015, 01:23:04 pm »
Here ya go Nikko.

PP 505, 475, 445.
Like Like x 1 View List

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #86 on: February 27, 2015, 01:44:01 pm »
Thanks, 1997 week 46 is a really late true 2083, specially for the US - so you may need to check the bore of the cylinder to verify that the labels aren't lying.  ;)

That's pretty much right at the time where EPA became an issue, so it might be one of the very last 82.4cc ones.....

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #87 on: February 27, 2015, 01:52:39 pm »
Here is the info on what I see for when the II started being sold.  My info is only as good as I read in front of me from sells. So take it for what it is worth.

1995   2083 Turbo  83cc
1996   2083 Turbo  83cc
1997   2083 Turbo  83cc
1998   2083 Turbo  83cc
1999   2083 Turbo  77cc   No II on sticker  by info
2000   2083 Turbo  77cc   No II on sticker  by info
2001   2083 II Turbo  77cc
2002   2083 II Turbo  77c
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #88 on: February 27, 2015, 02:26:20 pm »
Thanks for the info Kevin.

I decided to check the bore anyways.   I used the solder method and checked it twice.  It is definitely 54MM.
I also noticed it has the green coil which I believe was the limiting coil.

PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #89 on: February 27, 2015, 03:11:04 pm »
Green coil on my 505 and 475 was limited like 10-11k.  But the green coil on the 445 isnt.   I left the 445 coil in being it was unlimted and into the  13's which is all I needed for stock saw.  The 475 and all 505's got unlimted partner 5000 or husky 55 coils.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
321 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
35 Replies
1368 Views
Last post January 12, 2016, 11:32:53 am
by Tractorsaw1
38 Replies
868 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
265 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
470 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
183 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
187 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
18 Replies
449 Views
Last post December 22, 2019, 09:51:20 am
by Cut4fun .
15 Replies
313 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
110 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .