Author Topic: Jonsered 2083  (Read 8525 times)

0 Members and 0 Guests are viewing this topic.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #90 on: February 28, 2015, 11:28:09 am »
Green coil on my 505 and 475 was limited like 10-11k.  But the green coil on the 445 isnt.   I left the 445 coil in being it was unlimted and into the  13's which is all I needed for stock saw.  The 475 and all 505's got unlimted partner 5000 or husky 55 coils.

That's really odd, considering that the max power rating was at 10,000rpm for the 82.4cc 2083..... ::)

Max recommended rpm was 13,500rpm, according to the 1996 WS manual (the file is too large to attach).

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #91 on: February 28, 2015, 11:50:06 am »
Green coil on my 505 and 475 was limited like 10-11k.  But the green coil on the 445 isnt.   I left the 445 coil in being it was unlimted and into the  13's which is all I needed for stock saw.  The 475 and all 505's got unlimted partner 5000 or husky 55 coils.

That's really odd, considering that the max power rating was at 10,000rpm for the 82.4cc 2083..... ::)

Max recommended rpm was 13,500rpm, according to the 1996 WS manual (the file is too large to attach).

I may have manual already but email me the one you have too. I will fix to link. 
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #92 on: February 28, 2015, 11:57:25 am »
ST others have seen what I have.

copy pasted info below.

IPL's the Poulan Pro 475 and 505 used a different coil part # then  the 415, 425 and 445 leading me to believe that they did indeed have a rev limited coil on the 475 and 505.

Searching found that the part # for the 415 425 445 coil superceded to part # 544018401 which is a  coil on a bunch of Huskys like a 55  etc.

Green coil 475  only turns a little over 10K.
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #93 on: February 28, 2015, 12:24:48 pm »
I don't doubt what you said - I just pointed at the sillyness of what they did. Stuff like that has happened on other saws (well, at least one model that I know of) as well, so it isn't unique.   ;D

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #94 on: February 28, 2015, 12:45:39 pm »

I may have manual already but email me the one you have too. I will fix to link. 

Done.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #95 on: February 28, 2015, 01:34:31 pm »

I may have manual already but email me the one you have too. I will fix to link. 

Done.

Holy crap that is a huge file  :o. 128 pages with multiple saws listed. Not the one I had seen before.
  I wont be able to  link that one here for sure.  But will email it to folks like you did me.  Thanks Niko  for sharing that find.   8)
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: J-Red 2083
« Reply #96 on: February 28, 2015, 01:39:13 pm »

I may have manual already but email me the one you have too. I will fix to link. 

Done.

Holy crap that is a huge file  :o. 128 pages with multiple saws listed. Not the one I had seen before.
  I wont be able to  link that one here for sure.  But will email it to folks like you did me.  Thanks Niko  for sharing that find.   8)

Just under 5mb. The numbers I referred are in one of the last pages - but I don't know how to post just one page from a pdf document?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #97 on: February 28, 2015, 01:59:24 pm »

I may have manual already but email me the one you have too. I will fix to link. 

Done.

Holy crap that is a huge file  :o. 128 pages with multiple saws listed. Not the one I had seen before.
  I wont be able to  link that one here for sure.  But will email it to folks like you did me.  Thanks Niko  for sharing that find.   8)

Just under 5mb. The numbers I referred are in one of the last pages - but I don't know how to post just one page from a pdf document?

I had to ask my son  which happens to be home from college.  Will get that 1 page posted in a bit. :)
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #98 on: February 28, 2015, 02:06:41 pm »
I cut it down to just the 2077 2083. 

Click pic to make bigger and readable. Now you can save it Niko. 

REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #99 on: February 28, 2015, 03:44:50 pm »
Looks like some neat info.   128 pages wow.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
321 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
35 Replies
1368 Views
Last post January 12, 2016, 11:32:53 am
by Tractorsaw1
38 Replies
868 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
265 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
470 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
183 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
187 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
18 Replies
449 Views
Last post December 22, 2019, 09:51:20 am
by Cut4fun .
15 Replies
313 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
110 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .