Author Topic: Jonsered 2083  (Read 17359 times)

0 Members and 89 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Jonsered 2083
« on: March 30, 2011, 06:31:05 pm »
I missed a jonsered 2083 and 2077 today on ebay. I bid what I felt they were worth dead needing top ends at least as listed.

My question is, I know the 2083 came in 77cc and 82cc. Is there any labels, decals or markings so we know which ones are 82cc and 77cc. 

I heard and read in the past that there was 2083 and 2083 II. Do they say that anywhere on the saw?

Jonsered 2083 IPL  http://www.jonsered.com/ddoc/JONI/JONI2001_AAaa/JONI2001_AAaa__106253062.pdf

Share on Facebook Share on Twitter


Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Jonsered 2083
« Reply #1 on: March 30, 2011, 07:56:36 pm »
On the starter cover, at least.

The 2083 was 82.4cc, the 2083 II was 76.5cc, and a later EPA version for the US only, as far as I know.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16

  • Total Badges: 22
    Badges: (View All)
    Sixth year Anniversary Level 5 Fifth year Anniversary 100 Posts Fourth year Anniversary Karma Good
Re: Jonsered 2083
« Reply #2 on: March 31, 2011, 09:57:55 am »
Exactly, I have one I need to piece together, I was all excited to get it and then as always, I have too many project and not enough time.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16

  • Total Badges: 22
    Badges: (View All)
    Sixth year Anniversary Level 5 Fifth year Anniversary 100 Posts Fourth year Anniversary Karma Good
Re: Jonsered 2083
« Reply #3 on: April 21, 2011, 10:56:28 am »
Ok, I got it together as I had hoped.  Here are some vids.




David
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #4 on: April 22, 2011, 09:28:46 pm »
DY how do you think it compares to other saws in the 75cc 82cc class? My stock 505 82cc didnt impress me as much as the 80cc echo.

Then again I havent went through the 505 yet and thinking it is in need of a carb kit. 14K is what I found the 415 and 505 like stock.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16

  • Total Badges: 22
    Badges: (View All)
    Sixth year Anniversary Level 5 Fifth year Anniversary 100 Posts Fourth year Anniversary Karma Good
Re: Jonsered 2083
« Reply #5 on: April 23, 2011, 09:21:31 am »
I would have to agree with you Kevin. Now mind you I ported it a little, but the way it runs reminds me or a 7900 stock (I have never run a ported one) its very smooth lots of torque but it doesn't have that zing.  I feel confident a 460 would beat it. There is still a lot to get out of it as far as porting, I don't know if I want to push it or just move it down the road?

I guess I need a little more time with it, maybe an 8pin on there and compare it to a 372 and some other saws.  I haven't run saws very much lately.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: Jonsered 2083
« Reply #6 on: April 23, 2011, 11:17:24 am »
I wonder who built Jerry Gingras Poulan 5 cube? Whoever it was did a great job and I would bet on a Marcel MVP build.

I can see why they can be built into a good 5 cube. 

1:06 into video 

http://www.youtube.com/watch?v=XDrXvPxZy6M&feature=player_embedded

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Jonsered 2083
« Reply #7 on: April 23, 2011, 12:42:23 pm »
DY how do you think it compares to other saws in the 75cc 82cc class? My stock 505 82cc didnt impress me as much as the 80cc echo.

Then again I havent went through the 505 yet and thinking it is in need of a carb kit. 14K is what I found the 415 and 505 like stock.

If an Echo beat it, I assume something is wrong with it. ;)

14K is more than the recommended max, but such things happen..... ;D 

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16

  • Total Badges: 22
    Badges: (View All)
    Sixth year Anniversary Level 5 Fifth year Anniversary 100 Posts Fourth year Anniversary Karma Good
Re: Jonsered 2083
« Reply #8 on: April 23, 2011, 02:14:38 pm »
oh they definitely have potential.  I basically did a snelly to it.  pulled the gasket widened the ports.  the squish is still up around 28 thou and I am sure I could get a good bit more by tweaking a few things  it not even really muffler modded the baffle is still in.

ST the saws are normally limited to 12.5k  I think so it is a bogus max rpm.  so you think the echo shouldn't be stronger ST I guess Kevin will have to go to the wood pile with the video camera and show us. :D

d

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Jonsered 2083
« Reply #9 on: April 27, 2011, 01:09:11 pm »
The WS manual from 1996 say max. 13.5 k for the 2083 and the 2077.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
818 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
3384 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
963 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
911 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
524 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
688 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
22 Replies
2133 Views
Last post February 26, 2024, 06:51:11 am
by Cut4fun
15 Replies
1443 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
536 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
13 Replies
1124 Views
Last post February 26, 2024, 10:49:43 am
by Cut4fun .