Author Topic: Jonsered 2083  (Read 17339 times)

0 Members and 42 Guests are viewing this topic.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171

  • Total Badges: 31
    Badges: (View All)
    Level 6 Sixth year Anniversary Fifth year Anniversary 1000 Posts Fourth year Anniversary 500 Posts
Re: Jonsered 2083
« Reply #40 on: February 12, 2013, 05:42:20 pm »
The bearing OD is the same for the 288, 385, and 066. Just use the wrist pin and bearing for the same piston.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Jonsered 2083
« Reply #41 on: February 22, 2013, 08:07:32 pm »
Your Amish dealer is very nice to you.  8)   Is it a 77cc II or 83cc?


My guess is 83cc because i think it would say 2083II on the starter if it were 77cc. But i'll know for sure when i pull the cylinder..
It would, unless the starter cover is from another saw - you never know on used saws, before you check.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #42 on: February 24, 2013, 07:13:19 pm »
066 Meteor piston is .020 higher then 2083 OEM piston. Squish with gasket, OEM piston was .041. With 066 piston squish is at .021. Comp is at 170 pounds. The 2083 rod is wider than the 066, piston needs to be opened up. Runs good ;).
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #43 on: February 24, 2013, 08:54:21 pm »
Thats what I was figuring.

 Thanks Ron for being our guinea.  ;)

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Jonsered 2083
« Reply #44 on: February 25, 2013, 12:38:47 am »
066 Meteor piston is .020 higher then 2083 OEM piston. Squish with gasket, OEM piston was .041. With 066 piston squish is at .021. Comp is at 170 pounds. The 2083 rod is wider than the 066, piston needs to be opened up. Runs good ;).

What did you use to widen the piston where the wrist pin fits to the rod?   I would like to know in case I ever decide to do this kind of mod.   Saw looks good and I bet it runs good.
PP 505, 475, 445.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #45 on: February 25, 2013, 05:09:03 pm »
066 Meteor piston is .020 higher then 2083 OEM piston. Squish with gasket, OEM piston was .041. With 066 piston squish is at .021. Comp is at 170 pounds. The 2083 rod is wider than the 066, piston needs to be opened up. Runs good ;).

What did you use to widen the piston where the wrist pin fits to the rod?   I would like to know in case I ever decide to do this kind of mod.   Saw looks good and I bet it runs good.
I had to have it machined out.
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #46 on: February 25, 2013, 05:39:08 pm »
066 Meteor piston is .020 higher then 2083 OEM piston. Squish with gasket, OEM piston was .041. With 066 piston squish is at .021. Comp is at 170 pounds. The 2083 rod is wider than the 066, piston needs to be opened up. Runs good ;).

What did you use to widen the piston where the wrist pin fits to the rod?   I would like to know in case I ever decide to do this kind of mod.   Saw looks good and I bet it runs good.
I had to have it machined out.

Do you recall how much on each side had to be removed?  Just curious.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #47 on: February 25, 2013, 09:05:58 pm »
I honestly dont know. Not much though. It was made like the OEM. The NWP BB460 would work so i assume the 066 NWP would be a direct bolt on.
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #48 on: March 17, 2013, 08:59:08 am »
I honestly dont know. Not much though. It was made like the OEM. The NWP BB460 would work so i assume the 066 NWP would be a direct bolt on.

baileys pizzed me off so bad on my last order after 3 days of trying to order NWP piston and other things.  My paypal was on hold by them but they said they wasnt showing my order etc etc etc. Plus wouldnt give my credit for my $10 off code. I had written that off already and just wanted my order processed.
So day 3 I said just cancel my freaking order and ordered another 066 afm piston.

Well as luck has it I'm opening this one up. Started on it yesterday.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #49 on: March 17, 2013, 01:14:07 pm »
I couldn't pay by paypal the last time either. ??? ???
Ron

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
818 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
3380 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
962 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
911 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
524 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
686 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
22 Replies
2133 Views
Last post February 26, 2024, 06:51:11 am
by Cut4fun
15 Replies
1439 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
536 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
13 Replies
1122 Views
Last post February 26, 2024, 10:49:43 am
by Cut4fun .