Author Topic: Jonsered 2083  (Read 10925 times)

0 Members and 1 Guest are viewing this topic.

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #80 on: December 17, 2014, 03:01:00 pm »
I think I like rounding up parts for saws, almost as much as working in on them.  Yep, I got the metal clutch cover & small outer dawg.  The top cover has a little melt on.  Ok so I had a trade deal but wasn't sure my guy was going to come up with a case, Hey I am impatient.  So this popped up on the pay & I offered $20 & its on its way.  Kevin do you have a oil cap to match that gear shaped gas cap?  I kinda like it.  The gas tank may be crap, not sure will find out soon enough.  Whats any thoughts on that piston & ring, I need to recheck it, but I think its at 135, wish I had a new ring for it, might just run it.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22586
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #81 on: December 17, 2014, 03:55:43 pm »
Your piston looks like it will clean up. Just got to pull it and check closer and check those skirts for fit.

That cap isnt OEM for saw. No dont have any like that.

REDNECK Saw Repair Getter Done

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #82 on: December 17, 2014, 04:04:35 pm »
Maybe that cap was part of that west coast thing?  Lol there is a west coast jonsered decal on the top cover of it.  Well back a few months ago I looked at my local poulan parts dealer & I could get about all parts for these, not the case any more.  I hope Jacks doesn't disappoint me here.  Glad I ordered a new top cover & air filter cover for my 380 when you could get those in black & not purple.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22586
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22586
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #84 on: December 17, 2014, 04:15:44 pm »
jonsered 2077 west coast edition
REDNECK Saw Repair Getter Done

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #85 on: December 17, 2014, 04:21:57 pm »
Thought I would add some more on the west coaster, now on its way for a midwest makeover.  I got a 55 coil on the way to replace either of these green ones.  I also noticed the 2077 had a red plastic brake housing where the 2083 & I think 505's were black & 475 & others yellow.  I noticed this cause the front area was broke off the 2083.


Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Jonsered 2083 project
« Reply #87 on: December 17, 2014, 04:49:34 pm »
Today I emailed Scott over at the Chainsawr store if he had a good 445 quad port cylinder & piston, he did produce a nice 2083 piston & cylinder if anyone is looking, its now in stock.  He probably laughs everytime he reads my request, but he did come thru for me with a sweet 066 non decompression cylinder at a great price, so you never know.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22586
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #88 on: December 17, 2014, 05:31:43 pm »
2083 topend = ouch   wonder if 52mm or 54mm notice no decomp cylinder.

445 topend and 2083.

Thanks for letting us know though.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22586
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #89 on: December 22, 2014, 01:32:43 pm »
2083

2083 Turbo   2000   $780.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2083 Turbo   1999   $799.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2083 Turbo   1998   $799.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    82
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2083 Turbo   1997   $809.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    82
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2083 Turbo   1996   $809.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    82
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2083 Turbo   1995   $809.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    82
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
379 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
1039 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
381 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
534 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
226 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
240 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
20 Replies
796 Views
Last post April 12, 2021, 07:22:15 am
by Cut4fun
15 Replies
411 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
167 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
9 Replies
269 Views
Last post July 13, 2021, 08:09:50 pm
by 3000 FPS