Author Topic: Jonsered 2083  (Read 10866 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #90 on: December 22, 2014, 01:33:12 pm »
2083 II

2083 II Turbo   2002   $780.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    16
2083 II Turbo   2001   $780.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    5
Dry Weight:    15
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083 project
« Reply #91 on: December 22, 2014, 01:34:05 pm »
2077

2077 Turbo   1994   $779.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    4.67
Dry Weight:    14.9
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2077 Turbo   1993   $789.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    76.5
   
Engine Size Cubic Inches:    4.67
Dry Weight:    14.9
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2083
« Reply #92 on: December 25, 2014, 04:00:19 pm »
I dont know if I ever mentioned but found a air leak at base gasket area as to why the 505 in 1st page wasnt impressive to me then.  Ended up putting a nicer better 505 topend on that saw and new oem base gasket.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 291
  • Location: Carpenter, Wyoming
J-Red 2083 jonsered
« Reply #93 on: February 26, 2015, 07:27:06 pm »
I bought this saw about 2 years ago and then have never got around to using it yet.   As you can see it is in very nice condition.    I plan on trying it out but other things just kept me busy but maybe this summer.
I do not believe I have ever shown it on here before so I took a couple of pics.

PP 505, 475, 445.
Winner Winner x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #94 on: February 26, 2015, 07:31:36 pm »
Nice one and has the small outer dawg too.

Plastic or metal clutch cover?
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 291
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #95 on: February 26, 2015, 07:39:10 pm »
It is the Mag clutch cover.
PP 505, 475, 445.
Winner Winner x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #96 on: February 26, 2015, 07:58:15 pm »
Dang  :o that puppy has all the good stuff.   8) 8)
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 291
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #97 on: February 26, 2015, 08:12:17 pm »
I was looking today and I have another 28" bar for this saw also.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22572
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: J-Red 2083
« Reply #98 on: February 26, 2015, 08:21:21 pm »
Nice I was looking at 28" bars the last 2 days. Man what a spread on drive link counts. 90dl 91dl 92dl 93 dl bars.  I was getting dizzy in my search.   
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 291
  • Location: Carpenter, Wyoming
Re: J-Red 2083
« Reply #99 on: February 26, 2015, 08:48:08 pm »
I have two 28" bars one I used on the 475 and the other for the 505's or 2083.   I would have to look at them again to get the drive count.  Really I should see if they are both the same.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
368 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
1025 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
374 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
522 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
219 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
232 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
20 Replies
784 Views
Last post April 12, 2021, 07:22:15 am
by Cut4fun
15 Replies
409 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
165 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
9 Replies
253 Views
Last post July 13, 2021, 08:09:50 pm
by 3000 FPS