Author Topic: Jonsered 2094 v/s 660  (Read 4475 times)

0 Members and 0 Guests are viewing this topic.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Jonsered 2094 v/s 660
« Reply #20 on: January 23, 2012, 06:16:13 pm »
extreme one ;D
I think what I'm getting at, were the 395 ported to that extreme?
Yes. i would not compare my ported 066 to a stock 395. But you never know how a saw race would end up if one operator ran all saws and all saws used the same chain. Also, i find it funny how people rave about certain saw's and i think they are a huge let down. The 262 is one example. I have one. I'm not impressed. I'll be selling it soon. The 288 is another. Every body says they run better than a 660. Thats complete BS. ive had both. Everybody is entitled to there opinion i guess. :)
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2094 v/s 660
« Reply #21 on: January 23, 2012, 07:05:27 pm »
I take it the 395 and 066 was both ported. Do you want to share who ported both saws?

 I just watched a ported 395 cutting small 8x8 wood on youtube and I wasnt impressed with it (video was only 6 days old). 

Dang it man will somebody show me a 395 that will cut and live up to the talk I have always heard over the years.
REDNECK Saw Repair Getter Done

Offline Playinwood

  • 6 cube
  • ****
  • Posts: 246
  • Karma: 5
Re: Jonsered 2094 v/s 660
« Reply #22 on: January 23, 2012, 09:37:31 pm »
I've got one here but I dont know if it would shine in 8x8, never tried it, but stick it in 20 inch beech and you'll giggle.
But it was made for that.

Offline scott kunz

  • 4 cube
  • **
  • Posts: 42
  • Karma: 8
  • Location: augusta wi
Re: Jonsered 2094 v/s 660
« Reply #23 on: January 24, 2012, 01:06:33 am »
hi all. its good to see some names i have not seen for awile.most of you don't know me but maybe that will change in time.

just to claify a few things about these two saws. 2094 was built by copsy as a good work saw, as far as i know it has a pop up piston.
the 660 i built. there is no popup piston. piston is stock, unaltered. infact the only things that are ported it the cylinder and muffler. this is a woods mod saw, not a high rpm saw. i think it was 40% faster cut times in bigger wood.

the 660 is by no means a race saw but runs real well.
the 2094 looks sick, but i think its the porting.
latter scott
woods port $250 any saw plus any needed parts
work 715-286-2741
cell 715-456-0494
scott

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2749
  • Karma: 167
Re: Jonsered 2094 v/s 660
« Reply #24 on: January 24, 2012, 09:45:44 am »
Again only a general statement not directed at anybody .If you high port a saw for RPM's it won't be worth 2 cents as a torque monster  woods saw .

A few years back a lot of people got on that kick of cookie cutters which would rip snort though an 8 inch cant like greased lightning .In the real world they didn't meet the expectations of the owners who became very disgruntled with the whole situation .

You know it's cool I guess to raise that exhaust up to 92 and the thing sound like an azz kicking monster  but you also knock the strong right out of them . I think that old kick of GTG saws has about went the way of the plow horse for most unless they really want a cookie cutter .

All that screaming rpm's do in the air is make noise .So it's cranking 15 thou then hits the wood and drops to 10 .You haven't gained a thing except turn a saw into a toy .Now toys are fun too ,I have a few .You just gotta keep things in perspective though .

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: Jonsered 2094 v/s 660
« Reply #25 on: January 24, 2012, 12:29:23 pm »
I got a couple videos on my youtube channel of 395's that seem to cut pretty good , In stock forum I hate the 395 but ported I really like them , I just hope the guys that stole mine is having fun with it . I have ported a couple 394's also and as far as what  is a faster saw I will take the 394 over the 395 if speed is important ,

Offline MacLaren

  • 4 cube
  • **
  • Posts: 30
  • Karma: 1
Re: Jonsered 2094 v/s 660
« Reply #26 on: January 26, 2012, 06:36:34 pm »
Just to touch onwhat Scott said, actually the 2094 does not have a pop up piston.  Atleast Eric Copsey told me she didnt.  It cost me 250 bucks.  I should have never let him touch it.  She will make her way towards Scott after the build off.  I honestly believe it was a hack port job.  Time will tell.
I certainly dont expect Scott to make her as fast as that 660.  he may not be able too.  Depends how bad Eric Copsey screwed her up.  I will also say that 660 Scott did is exceptional.  I know of Scotts saws takin more than one 394/395 in a race.  I cant wait till he gets ahold of the 2094.

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: Jonsered 2094 v/s 660
« Reply #28 on: February 04, 2012, 09:44:50 pm »

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Jonsered 2094 v/s 660
« Reply #29 on: February 05, 2012, 05:45:07 am »
Now that is a fast one!!! :o :o :o
Ron

 

Related Topics

  Subject / Started by Replies Last post
jonsered 49sp

Started by shrek366k « 1 2 3 » Jonsered

20 Replies
1981 Views
Last post July 14, 2014, 12:54:21 pm
by shrek366k
10 Replies
264 Views
Last post August 28, 2014, 07:49:03 pm
by SawTroll
2 Replies
267 Views
Last post September 23, 2014, 08:50:25 pm
by weimedog
6 Replies
333 Views
Last post November 12, 2014, 09:47:53 am
by Nathaniel Vansickle
4 Replies
249 Views
Last post April 23, 2015, 01:14:06 pm
by wild262
5 Replies
489 Views
Last post November 16, 2015, 08:30:21 am
by weimedog
1 Replies
322 Views
Last post October 13, 2015, 12:24:47 pm
by Cut4fun
2 Replies
294 Views
Last post April 11, 2016, 03:15:34 pm
by SDB777
6 Replies
143 Views
Last post August 21, 2017, 08:12:55 am
by deezlfan
4 Replies
512 Views
Last post October 17, 2016, 10:35:27 pm
by HolmenTree