Author Topic: Jonsered 2095  (Read 2135 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4085
  • Karma: 165
  • OHIO REDNECK
Jonsered 2095
« on: January 07, 2014, 11:18:48 am »
REDNECK Saw Repair

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4085
  • Karma: 165
  • OHIO REDNECK
REDNECK Saw Repair

Offline weimedog

  • 6 cube
  • ****
  • Posts: 260
  • Karma: 57
Re: Jonsered 2095
« Reply #2 on: January 12, 2014, 04:29:32 pm »
Meteor Pistons work fine. Actually have two ( and a NOS Cylinder and a good used one that I want to build around ).  In a pinch a piston for a Husqvarna 394 will work.

Had a some 2094/5 pics in this vid & a pic of a meteor piston for a 2094/5 as well if seeing one might alleviate stress a bit. The tough part is finding new intake parts.

An eBay OEM piston...

http://www.ebay.com/itm/Piston-assy-OEM-Jonsered-chainsaw-2094-2095-56MM-/150969959461?pt=LH_DefaultDomain_0&hash=item232682c425

And yet another eBay meteor piston source.....
http://www.ebay.com/itm/Piston-Kit-fit-JONSERED-2094-2095-Chainsaw-56mm-Kolben-/400332778419?pt=LH_DefaultDomain_0&hash=item5d35b16bb3

Jump past 1/2 way for 2094, and about 3/4 thru pics of both Episan and Meteor pistons. Nice looking stuff.
https://www.youtube.com/watch?v=WK8R_Fnw9AQ

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #3 on: June 30, 2015, 10:45:49 pm »
Had a jonsered 2095 dropped off today to check over. Noticed missing muffler and scored piston from get go. Broken off brake handle. Doesn't turn over.

If I remember right from passing on these over the last few years. Parts are hard to find if I remember right?





REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #4 on: June 30, 2015, 11:04:54 pm »
specs page 2 http://www.jonsered.com/ddoc/JONI/JONI2002_AAaa/JONI2002_AAaa_106288161.pdf

2095 Turbo   2003   $900.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2095 Turbo   2002   $900.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2095 Turbo   2001   $895.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    24
2095 Turbo   2000   $895.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    24
2095 Turbo   1999   $894.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    24
2095 Turbo   1998   $894.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    24
2095 Turbo   1997   $909.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    24
2095 Turbo   1996   $889.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2095 Turbo   1995   $889.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2095 Turbo   1994   $894.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
Engine Size Cubic Inches:    5.71
Dry Weight:    17.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    20
2095 Turbo   1993   $879.00   
Engine Make:    Jonsered
   
Engine Size Cubic Centimeters:    93.6
   
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #6 on: July 01, 2015, 11:33:38 am »
Just reading and learning. I know I have past one on Craigslist for $200 or best not long ago in Ohio.

Justsaws from Zanesville Ohio posted this in 08. 2095s sold for $950.00 with 24"-36" b/c setups new.

Average used price for good running saws in good condition seems to be around $400-$600.00. Have yet to see any used ones sell for over $600.00, the last couple new old stocks went for $900.00.

Parts are still available BUT MANY ARE NO LONGER MADE AND WHEN THEY ARE GONE THAT IS IT OR SO I WAS TOLD. I do not know if that is true.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #7 on: July 01, 2015, 11:35:47 am »
Jacob J  = There are no big bore kits for the 2094/2095 and the Husqvarna 394/395 top ends will not work on the Jonsereds. The case and cylinder heights on the 2094/2095 are different from any other saw.

I recently rebuilt a 2094 and I have one left to do. A Meteor 395 piston kit works well in the 2094/2095. The case gasket and base gaskets are still available as new parts through any Jonsered dealer.
The air filter is also still available new but many other parts are not available anymore.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #8 on: July 01, 2015, 11:40:08 am »
Found PHO price back in 2002 NEW MSRP  $ 831 pho
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #9 on: July 01, 2015, 11:49:47 am »
Justsaws = The main differences between the 2094 and 2095 are the ring locating pins are further apart on the 95 and handle bars can be different. The 94 was also sold without a decomp. valve. The exhaust port on the 2095 is shaped different. The 2095 is a fine saw and will pull a 36" bar with ease. It was the last saw sold by Jonsered that had any Jonsered design left in the crankcase, muffler, and carb setup. Otherwise the last of the good Jonsereds. I buy any that I find as they are one of my favorite modern large saws. Very nice with a 3/8 8 pin and a 24" bar.

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Jonsered 490

Started by bloodontheice « 1 2 3 4 5 » Jonsered

44 Replies
6474 Views
Last post April 22, 2020, 12:26:59 pm
by Cut4fun .
Jonsered 590

Started by Cut4fun « 1 2 ... 5 6 » Jonsered

58 Replies
5039 Views
Last post January 25, 2019, 03:05:09 pm
by Cut4fun .
Jonsered 111

Started by Cut4fun . « 1 2 3 » Jonsered

25 Replies
2387 Views
Last post August 30, 2014, 10:16:02 pm
by 660magnum
5 Replies
1187 Views
Last post September 18, 2011, 10:41:17 pm
by HolmenTree
Jonsered 535

Started by farmboy « 1 2 » Jonsered

19 Replies
2867 Views
Last post April 30, 2018, 01:42:23 pm
by leec
0 Replies
461 Views
Last post August 04, 2013, 08:28:00 pm
by kr5258
15 Replies
795 Views
Last post September 09, 2014, 10:01:46 pm
by mdavlee .
9 Replies
538 Views
Last post March 28, 2014, 10:27:40 am
by Spike60
5 Replies
460 Views
Last post September 02, 2015, 05:35:49 pm
by Cut4fun .
6 Replies
144 Views
Last post August 21, 2017, 08:12:55 am
by deezlfan