Author Topic: Jonsered 2095  (Read 2135 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #10 on: July 01, 2015, 11:52:52 am »
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #11 on: July 01, 2015, 03:01:48 pm »
All torn down. Rings were rusted to the cylinder, reason for feeling locked up. Exhaust side scored good and 2 spots on the ext cylinder bevel looks like it may have had something go through. Just looking at crank and rod bearings dont see any missing.

Gilardoni cylinder. Cant find any tell tell for piston make.

 @jacob j. does this all sound right so far?
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #12 on: July 01, 2015, 05:29:44 pm »
Looking up bar mount on this saw. Big SMS (009) taking that means D009 large husky?  Has a what looks like 37" Tsumura 3/8 063 on it.

update I just used a bar selector online and it came back to D009.
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Jonsered 2095
« Reply #13 on: July 01, 2015, 06:08:03 pm »
Yes, it should be D009. Husky was quite quick to change the larger Jonsereds from D024 to D009, after they took over production in 1987.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #14 on: July 01, 2015, 08:35:16 pm »
1997 right on the black tag. Plus starts out with a 7 with all the numbers on tag.
REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Jonsered 2095
« Reply #15 on: July 01, 2015, 11:12:52 pm »
IIRC I have a NOS 2095 PC.  If needed I'll check my drawer to be sure.
Shep

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Jonsered 2095
« Reply #16 on: July 02, 2015, 07:37:12 am »
Those are strong saws. I've used a 2094 and it was probably stronger than a 394. They were built mainly for milling and are heavier than the other 90cc offerings from stihl and husky.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #17 on: July 02, 2015, 09:34:38 am »
This one is going to need split possibly.  Not holding mix in crankcase with my redneck way of checking without top.  Not seeing where mix is going either.  :o 
Thinking maybe crankcase gasket leak possibility but to where yet I dont know.  :-\
REDNECK Saw Repair Getter Done

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Jonsered 2095
« Reply #18 on: July 02, 2015, 10:41:28 am »
Spike or taplinhill

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22019
  • Karma: 542
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2095
« Reply #19 on: July 02, 2015, 10:56:43 am »
I never seen no crap like this, just checked it again. Half the mix out of the crankcase area now, just say 14hrs later, but cant find where it went.

I did look in the oil and gas tanks too.  ???
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Jonsered 490

Started by bloodontheice « 1 2 3 4 5 » Jonsered

44 Replies
6474 Views
Last post April 22, 2020, 12:26:59 pm
by Cut4fun .
Jonsered 590

Started by Cut4fun « 1 2 ... 5 6 » Jonsered

58 Replies
5039 Views
Last post January 25, 2019, 03:05:09 pm
by Cut4fun .
Jonsered 111

Started by Cut4fun . « 1 2 3 » Jonsered

25 Replies
2387 Views
Last post August 30, 2014, 10:16:02 pm
by 660magnum
5 Replies
1187 Views
Last post September 18, 2011, 10:41:17 pm
by HolmenTree
Jonsered 535

Started by farmboy « 1 2 » Jonsered

19 Replies
2867 Views
Last post April 30, 2018, 01:42:23 pm
by leec
0 Replies
461 Views
Last post August 04, 2013, 08:28:00 pm
by kr5258
15 Replies
795 Views
Last post September 09, 2014, 10:01:46 pm
by mdavlee .
9 Replies
538 Views
Last post March 28, 2014, 10:27:40 am
by Spike60
5 Replies
460 Views
Last post September 02, 2015, 05:35:49 pm
by Cut4fun .
6 Replies
144 Views
Last post August 21, 2017, 08:12:55 am
by deezlfan