Author Topic: Jonsered 2166  (Read 580 times)

0 Members and 0 Guests are viewing this topic.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Jonsered 2166
« on: November 04, 2013, 10:17:26 am »
Is $530 a good price on a 2166 PHO NIB?  Found one @ this price.
Shep

Share on Facebook Share on Twitter


Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Jonsered 2166
« Reply #1 on: November 04, 2013, 11:54:28 am »
Yep. Best price I know of was $575.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4067
  • Karma: 162
  • OHIO REDNECK
Re: Jonsered 2166
« Reply #2 on: November 04, 2013, 12:43:17 pm »
Best I have seen now complete sister saw,  365XT 18" is shipped to door $660  and add $10 for 20" and so on.
REDNECK Saw Repair

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 331
  • Karma: 105
  • Location: Ulster County, NY
Re: Jonsered 2166
« Reply #3 on: November 05, 2013, 08:09:20 am »
I sell them here in the store for $600 with a 20" B&C, so $530 is a real good price.
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Jonsered 2166
« Reply #4 on: June 07, 2015, 11:46:51 am »
Are these saws any good? Have had a new one here for a month. Trying to decide what to do with it, use it or sell/trade it. Never had gas in it yet as I have 3 other 70-80cc saws now that never get used. Always had a 365 in the truck in my logging days for the odd large tree. Found them tougher than 371/372.

Any issues to address if I decide to keep it?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsered 2166
« Reply #5 on: June 07, 2015, 03:31:45 pm »
2166 70.7cc is  a detuned 372 Art.  X-Torq   Restriction in the transfer covers. Can grind them out.
REDNECK Saw Repair Getter Done

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Jonsered 2166
« Reply #6 on: June 07, 2015, 08:39:40 pm »
So both are rated for 28" bars. What's the real world advantage of the 372 version in 16" max wood?

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Jonsered 2166
« Reply #7 on: June 08, 2015, 02:58:55 pm »
So both are rated for 28" bars. What's the real world advantage of the 372 version in 16" max wood?

In 16" and smaller wood?  Probably almost indistinguishable without a stopwatch. 
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Jonsered 2166
« Reply #8 on: June 08, 2015, 03:23:57 pm »
So both are rated for 28" bars. What's the real world advantage of the 372 version in 16" max wood?
Basically none in this instance.

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Jonsered 2166
« Reply #9 on: June 08, 2015, 08:37:10 pm »
That's why we ran the old 365 over 372. Same work done for less money.

 

Related Topics

  Subject / Started by Replies Last post
Jonsered 490

Started by bloodontheice « 1 2 3 4 5 » Jonsered

44 Replies
6439 Views
Last post April 22, 2020, 12:26:59 pm
by Cut4fun .
Jonsered 590

Started by Cut4fun « 1 2 ... 5 6 » Jonsered

58 Replies
5008 Views
Last post January 25, 2019, 03:05:09 pm
by Cut4fun .
Jonsered 111

Started by Cut4fun . « 1 2 3 » Jonsered

25 Replies
2381 Views
Last post August 30, 2014, 10:16:02 pm
by 660magnum
Jonsered 2166

Started by Cut4fun « 1 2 3 » Jonsered

21 Replies
3801 Views
Last post February 08, 2012, 10:35:28 pm
by EHP
16 Replies
1832 Views
Last post December 23, 2013, 11:30:08 pm
by HolmenTree
jonsered 52e

Started by man of stihl « 1 2 » Jonsered

15 Replies
811 Views
Last post December 09, 2013, 08:19:17 pm
by Spike60
15 Replies
793 Views
Last post September 09, 2014, 10:01:46 pm
by mdavlee .
CS 2166 or CS 2172

Started by SDB777 « 1 2 » Jonsered

16 Replies
1108 Views
Last post November 27, 2015, 11:36:23 am
by SawTroll
6 Replies
364 Views
Last post February 15, 2016, 01:46:38 am
by Glock22C
3 Replies
317 Views
Last post February 03, 2018, 09:31:43 pm
by Cut4fun .