Chainsaw Repair

Picked up a 02 jonsered 2171 that was sold new in Dec 05 with 20" to homeowner north of me.

You can see where the saw has lost a fight with a tree or limb etc at one time. Case broken off above metal tag, Below oil cap at bottom of case and right at rear of oil cap case lip. Handle is tweaked some imo. Missing the top recoil faster, piece that goes inside - pivot deal and top right recoil bolt is wrong. 2 top left cylinder cover fasteners were wrong ones. Back left one appears stripped hole.

Saw cuts and runs as it should. Piston an cylinder still looked new inside.

Guy I know had sold it to a friend of his and replaced the 20" D009 with WRONG new 24" K095 set up for his needs of cutting up a pine he said. I didnt even catch it till I went to pull down after test cutting and thought wth to myself. That bar gave up a fight coming back off. 😂

Well the guy got the saw traded back in with some gun stuff today and he shot me a text.

Going to sell the whole shebang here pretty soon. 2171 PHO could be ran as is if you are not one that has to have a prefect looking saw. I tested it with 24" buried in dry ash.

The new 24" K095 bar is wrong bar for saw and chain is going to be sold too.