Author Topic: Jonsered 670 630 625 (Read 7003 times)

Cut4fun . · « **Reply #90 on:** October 05, 2022, 11:19:56 am »

NOS jonsered decal

If you see anything I can have shipped with mine if they are left

Cut4fun . · « **Reply #91 on:** October 06, 2022, 06:42:39 am »

Finally figuring out the puzzle. The inner piece I bought from 99 IPL is to short piece needed on 96 IPL 670 champ saws. 503736701 even though same part number used.

Cut4fun · « **Reply #92 on:** October 09, 2022, 07:25:02 am »

I swear I am about done trying to restore the jonsered saws. To many freaking changes within same series. 670 champ.
Thought I found better top cover to use from a dealer. He said 670 and later. Well I noticed right off some differences. Shorter at front of muffler. Left front bolt hole don’t line up with case hole.

Trying to figure out what top cover this is? Was supposed to be for later 670 champ like mine. The fastener hole front left is to far forward for my 96 later 670 champ case. The front is close to a inch short compared to my other cover and leaves about a inch short on front left case bare too. The idle location is same in covers.
(others said must be earlier cover or maybe later 625 630 cover) me no clue. But if someone needs it can have it for what I paid. One with 2 tickers on it is the one I just bought because it was nicer.

Least I got the correct NOS clutch cover and the champ decal. Even correct year inner plastic piece I had been looking for, for other cover. The other cover had the later 99 ipl inner piece I found that was to short but worked ok for use.
That was the main thing I wanted. Other cover was just a better look thing.

Cut4fun · « **Reply #93 on:** October 09, 2022, 08:10:45 am »

Guy from Maine = Yep....you're not the first guy to have that problem with the top cover. The 670 Champ (or Super II) came after the case change that allowed the one piece ign. All earier saws of this family, both Husky and Jred, had the two piece ign. The flywheel side case change began with the 268XP in 1987 but Jred didn't catch up until like......1992 or 93. When they changed the case half they also repositioned the front left cover screw. When looking at these saws to figure out what time frame they are from I always look at where that front cover screw is located in relation to the front upper recoil cover screw just below it......the recoils are all the same for early or late but the top cover screw is located forward of the recoil screw on the early models and aft of the recoil screw on the late ones. Of course, if the cover is not on the saw that bit info is not that helpful.

Cut4fun . · « **Reply #94 on:** October 09, 2022, 10:35:57 am »

This pic really shows the difference 2 sticker the early cover.
Length in front for muffler and front fastener.

Sell the 2 sticker cover for $25 and shipping. 2 coil saws and guessing 625 630.

Cover SOLD

Cut4fun . · « **Reply #95 on:** October 10, 2022, 02:58:37 pm »

Ok man learning this stuff now. The shorter overall one I received. Is still imo 625 630 and no clue what else.
Also they have 6” distance between left side fastener holes.
Wrong for 670.

Cut4fun . · « **Reply #96 on:** October 10, 2022, 02:59:41 pm »

Here is my 670 cover and it is overall longer. But with 5.5” left side distance between fastener holes.
Notice part numbers too.

Cut4fun . · « **Reply #97 on:** October 12, 2022, 05:58:23 am »

Jackpot. NOS Jonsered 670 cylinder cover

Flocked air filter since mine has mesh one. Thought better grab one. Even though huskys will work too.

I never ever want to try to make another jred period correct.

Cut4fun . · « **Reply #98 on:** October 13, 2022, 12:57:56 pm »

Well I guess ole 670 champ deserves a good cleaning before all these new nos covers go on.

The extra covers I have can be sold if someone really needs for their project 670 champ.
The clutch cover even has a nos brake band and other new parts in it. Even though inner plastic is for 99 and it needed 96-98 one.

Some 2083 and poulan NOS parts too.

Cut4fun . · « **Reply #99 on:** October 14, 2022, 05:07:41 am »

Cleaned up more then my norm for all the NOS covers and decal

Subject / Started by	Replies	Last post
Jonsered 590 Started by Cut4fun « 1 2 ... 5 6 » Jonsered	58 Replies 8421 Views	January 25, 2019, 03:05:09 pm by Cut4fun .
Jonsered 111 Started by Cut4fun . « 1 2 3 » Jonsered	25 Replies 3809 Views	August 30, 2014, 10:16:02 pm by 660magnum
Jonsered 535 Started by Iron City « 1 2 » IPL and Service Manuals	10 Replies 3732 Views	August 16, 2012, 10:13:21 am by Iron City
Jonsered 920 Started by chainsman1 Jonsered	5 Replies 1619 Views	September 18, 2011, 10:41:17 pm by HolmenTree
Jonsered 535 Started by farmboy « 1 2 » Jonsered	19 Replies 4661 Views	April 30, 2018, 01:42:23 pm by leec
Jonsered 535 Started by Cut4fun . Jonsered	8 Replies 1458 Views	October 25, 2012, 08:46:34 pm by mweba
Jonsered 80 Started by dutchsawdoctor « 1 2 » Jonsered	16 Replies 3178 Views	December 23, 2013, 11:30:08 pm by HolmenTree
jonsered 52e Started by man of stihl « 1 2 » Jonsered	15 Replies 1719 Views	December 09, 2013, 08:19:17 pm by Spike60
Jonsered 930 Started by Old Iron Logging « 1 2 » Jonsered	15 Replies 1797 Views	September 09, 2014, 10:01:46 pm by mdavlee .
Jonsered 490 Started by man of stihl Locked Sale and Wanted threads	7 Replies 662 Views	January 20, 2015, 08:46:22 pm by man of stihl

Chainsaw Repair

News:

Author Topic: Jonsered 670 630 625 (Read 7003 times)

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun

Re: Jonsered 670 630 625

Cut4fun

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Cut4fun .

Re: Jonsered 670 630 625

Related Topics