Author Topic: Jonsred Raket 451E  (Read 1602 times)

0 Members and 0 Guests are viewing this topic.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Jonsred Raket 451E
« Reply #10 on: July 24, 2013, 04:20:43 pm »
I believe Partner was first with heated handles, about a decade earlier - but that version was based on exaust gas, and not electrical.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsred Raket 451E
« Reply #11 on: July 24, 2013, 06:03:46 pm »
I believe Partner was first with heated handles, about a decade earlier - but that version was based on exaust gas, and not electrical.

I really liked the exhaust heated handles to top handle and rear handle with adjustable heat.  Like them lot better then the kind on top handle only on XPG.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Jonsred Raket 451E
« Reply #12 on: July 24, 2013, 08:07:23 pm »
+1
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Jonsred Raket 451E
« Reply #13 on: July 25, 2013, 12:12:47 pm »
I believe Partner was first with heated handles, about a decade earlier - but that version was based on exaust gas, and not electrical.

I really liked the exhaust heated handles to top handle and rear handle with adjustable heat.  Like them lot better then the kind on top handle only on XPG.

  ??? Both handles are electrically heated on the XPG, G and WH saws (and the corresponding Stihl and Dolmars).

What varies is if they also come with heated carbs.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Jonsred Raket 451E
« Reply #14 on: July 25, 2013, 12:23:35 pm »
I believe Partner was first with heated handles, about a decade earlier - but that version was based on exaust gas, and not electrical.

I really liked the exhaust heated handles to top handle and rear handle with adjustable heat.  Like them lot better then the kind on top handle only on XPG.

  ??? Both handles are electrically heated on the XPG, G and WH saws (and the corresponding Stihl and Dolmars).

What varies is if they also come with heated carbs.

My OE 346xpg rear handle part must have not been working.  My heated carb part was clipped to run a 357 wabro carb.
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Jonsred Raket 451E
« Reply #15 on: July 25, 2013, 01:17:40 pm »
Yes.

Offline Magnus

  • 6 cube
  • ****
  • Posts: 237
  • Karma: 26
  • Location: Sweden
    • Chainsaw Collectors Forum
Re: Jonsred Raket 451E
« Reply #16 on: July 25, 2013, 01:57:25 pm »
I believe Partner was first with heated handles, about a decade earlier - but that version was based on exaust gas, and not electrical.

451 was out in 1976.
First Partner with heated handle was the R18, 1969.
First Jonsered with heated handles was likly 50/51 1971.
First Husqvarna with heated I think was 240SG 1973.

Chainsaw nut!

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
Re: Jonsred Raket 451E
« Reply #17 on: October 24, 2014, 02:51:44 pm »
finally dug out the 451, it needed a piston and oddly I had a NOS piston for this saw.   8)
I wanted to share some pictures of  the inside of the jug,  Nothing special but very small.  I plan on fueling it later.  I need a on off switch, a muffler at some point in time and I bet a carb kit will be needed.

any way here is a link to the pics.
http://s194.photobucket.com/user/joeking_photo/library/jonsered%20451ev?sort=3&page=1

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Jonsred Raket 451E
« Reply #18 on: October 24, 2014, 04:46:42 pm »
David, the cylinder looks clean. Does it use points? Or electronic
Adam

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Jonsred Raket 451E
« Reply #19 on: October 24, 2014, 06:56:36 pm »
David, the cylinder looks clean. Does it use points? Or electronic
Adam


Guess what the E in 451E means.... ;)

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
627 Views
Last post May 03, 2013, 01:44:44 pm
by HMLT360Pro
8 Replies
209 Views
Last post October 08, 2014, 09:48:22 pm
by aclarke
5 Replies
344 Views
Last post August 25, 2015, 09:13:02 pm
by 3000 FPS