« previous next »
Pages: [1]   Go Down

Author Topic: When the 670 became a "Super"  (Read 873 times)

0 Members and 9 Guests are viewing this topic.

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 369
  • Karma: 129
  • Location: Ulster County, NY

    • Total Badges: 29
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
When the 670 became a "Super"
« on: May 01, 2014, 09:15:56 am »
Found an old service bulletin from Jan 1988 that explains this and what was changed. Primarily, it concerns the introduction of a reinforced crankcase. The later air filter and holder was also introduced at this time, and also on the 625. There was a slight change to the carb, HS230B up to the 230C. There was an addition of a support plate as part of the carb mounting. The new crankcase can be identified by the round hole for the stop/start switch.

The changes were introduced on 670's beginning with serial number 748 0001, and from then on all 670 were called "Supers". The new crankcase also followed in due course on the 630 and 625.

Cool stuff.  8)
Logged
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395

Share on Facebook Share on Twitter

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

    • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: When the 670 became a "Super"
« Reply #1 on: May 01, 2014, 01:04:55 pm »
Thanks Spike!  ;D

Late 1987 fits 100% with what I thought, as the is a non-Super IPL dated 1987-05.!

If memory serves, the bulletin that explaines the Super to Super II changes is posted in another thread here, but I attach it here anyway, to keep the info together.

The remaining question is when the power specs changed from 3.3 to 3.6 kW.....
Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4671
  • Karma: 216
  • OHIO REDNECK

    • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: When the 670 became a "Super"
« Reply #2 on: May 01, 2014, 01:19:14 pm »
Nice info and Thanks for posting it and saving here for folks.
Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

    • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: When the 670 became a "Super"
« Reply #3 on: May 01, 2014, 11:52:33 pm »
Thanks for that Spike, the 670 is one of my favorite Jonsereds and I have one here in pieces that I hope to get back together one of these days.   I still have one NOS rubber intake boot that I got from you some time back that I have been saving for this saw.
Logged
PP 505, 475, 445.

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 369
  • Karma: 129
  • Location: Ulster County, NY

    • Total Badges: 29
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: When the 670 became a "Super"
« Reply #4 on: May 03, 2014, 09:54:37 am »
We all have those projects that we haven't quite got to yet.  :D

Hang on to that boot, they are all NLA now.
Logged
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395

Offline HolmenTree

  • Nitro Hotsaw
  • *******
  • Posts: 1382
  • Karma: 199
  • Location: Manitoba Canada

    • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 1000 Posts Seventh year Anniversary
Re: When the 670 became a "Super"
« Reply #5 on: May 03, 2014, 11:41:30 pm »
I remember the fall of 1986 the first 670 saws came into our logging camp and I do remember the crankcase issue from those first series of saws.
Also the first Stihl 064's came out that time too, I bought one of the first that came into the country.
Logged
Making a living with a saw since age 16.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

    • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: When the 670 became a "Super"
« Reply #6 on: May 07, 2014, 05:19:23 pm »
Question; How is the cylinder porting, and specially the transfer size of the 670 cylinders, compared to the 266SE/XP, respectively the 268SE/XP/Special?   ???
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
39 Replies
7218 Views 		Last post December 25, 2014, 01:59:05 am
by dutchsawdoctor
0 Replies
188 Views 		Last post February 13, 2012, 07:50:02 am
by timber
1 Replies
832 Views 		Last post May 25, 2012, 05:43:04 pm
by Cut4fun .
26 Replies
2839 Views 		Last post January 17, 2018, 05:21:40 pm
by HolmenTree
25 Replies
2109 Views 		Last post October 10, 2013, 08:49:33 pm
by Al Smith
4 Replies
682 Views 		Last post November 28, 2013, 11:00:47 pm
by Bitburger
57 Replies
2410 Views 		Last post January 01, 2014, 07:56:48 pm
by Cut4fun .
9 Replies
2144 Views 		Last post January 24, 2014, 04:16:01 am
by Magnus
2 Replies
762 Views 		Last post February 22, 2014, 05:47:21 pm
by Gregg MacPherson
3 Replies
612 Views 		Last post March 24, 2014, 08:12:01 pm
by Gregg MacPherson