Author Topic: (SOLD) Great Running Husqvarna 350 FS/FT. 45mm/52cc non purge bulb version.  (Read 286 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.






2003 production Husqvarna 350 for sale/trade.  Runs great.   45mm piston/52cc version with the removable transfer port covers.  No purge bulb.  Just replaced the OEM plastic intake boot clamp with the 'updated' metal clamp and plastic boot support assembly.  New oil tank cap.

Original laminated .325" pitch sprocket nose bar.  16" to the tips of the spikes, 17" to the case front.  Good loop of Husqvarna H30 .325-.050G narrow kerf ('Pixel') chain. 

Piston/cylinder/ring look great. 

Everything works.  Starts/idles/cuts fine.  Chainbrake works.  Oiler works.  Choke/throttle lock and kill switch work.  Good, almost new air filter.  AV mounts are all good.  MN/SN tag present and unmolested.

Has the usual scratches/scrapes that you'd see on any used Husqvarna.  See pics.  Top cover came from another saw, so the plastic 'tones' don't match.  There's a few flecks of dried pitch on the rear handle and possible other areas.  I just got tired of picking them off...

$150 plus actual shipping, or possible trade. 

Will ship to continental US.  Canada, or Hawaii/Alaska possible.

Here's a list of things I'd take in trade (either partial or full...........depending on the details):

-Good usable 32" 3/8" pitch sprocket nose large Husqvarna mount bar.

-Good non 'generic' (meaning no HF/chinese knockoff) chain spinner.

-Good, uncracked/unbroken Husky 2100/2101/298/1100 AF cover.

-Good, uncracked/ubroken Husky 281/288 clutch cover.

-Sugihara LW bars.

-New or like-new high-end 'double' type brushcutter shoulder harness.  Something recent from Husqvarna or Stihl.

-?

Who knows what else? 

Perhaps parts or project saws:

-Poulan 4900-8500.

-Husqvarna 181/281/288.

-Husqvarna 1100/2100/298/2101.

-McCulloch 82cc SP-80 thru DE80.

-Homelite XL-900 series.

-Homelite XL-88/98 cutoff saws.

-Homelite DM-20 cutoff saws.

-Homelite XL400A or XL500.

-?
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22013
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Check with Moody. He was asking me about these.  He is a member here too.

I think his internet access is down right now though.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Check with Moody. He was asking me about these.  He is a member here too.

I think his internet access is down right now though.

Will do.  Thanks Kevin.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Well that was quick.
« Reply #3 on: October 06, 2013, 09:51:24 pm »
Sold!
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1161 Views
Last post February 21, 2012, 09:43:13 am
by mweba
5 Replies
603 Views
Last post January 02, 2013, 08:23:58 am
by William Greene
6 Replies
1105 Views
Last post June 02, 2013, 09:30:02 pm
by brokenbudget
7 Replies
341 Views
Last post November 05, 2013, 11:33:24 am
by KilliansRedLeo
5 Replies
179 Views
Last post October 03, 2013, 11:51:34 am
by 660magnum
8 Replies
882 Views
Last post November 12, 2013, 08:11:36 pm
by Cut4fun .
2 Replies
685 Views
Last post November 06, 2013, 07:57:16 pm
by 3000 FPS
16 Replies
430 Views
Last post February 02, 2014, 04:33:10 pm
by KilliansRedLeo
5 Replies
311 Views
Last post April 13, 2014, 11:22:26 am
by KilliansRedLeo
2 Replies
79 Views
Last post April 10, 2018, 10:30:30 am
by Cut4fun .