Author Topic: WTB Husqvarna 346xp at a reasonable price  (Read 1167 times)

0 Members and 0 Guests are viewing this topic.

Offline Gunrush128

  • 3 cube
  • *
  • Posts: 5
  • Karma: 1
WTB Husqvarna 346xp at a reasonable price
« on: October 06, 2013, 12:21:29 pm »
LIke the title says, I'm looking for a 346xp at a reasonable price.  I'd prefer NE in very good condition with stock top-end.  PHO is okay, or if a bar and chain are included, that's okay too.  Please let me know what you have to offer, and how much you're looking to get for it.  Thanks!!  Chris

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #1 on: October 06, 2013, 01:30:24 pm »
Check with spike60 username here. He had new for goooooood prices. Might have a used in too, never know.   

Also take a look at a husqvarna 545 a detuned 550xp.  I would take the 545 over a 346xp. Owned all 3.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #2 on: October 06, 2013, 04:08:20 pm »
Is Neal Murphy on this site?  He often has rebuilt 346XP's for sale for very reasonable prices.  He rebuilds them himself....


To continue the theme of suggesting an alternate Husqvarna model................................I have a good running 45mm/52cc Husky 350 that I'd sell/trade for a reasonable price.:D
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #3 on: October 06, 2013, 04:45:41 pm »
Personally I wouldnt buy rebuild  from nmurph. He knows not to use certain circlips, but yet he keeps installing them in 346 saws he sales.
 Yeah he has a groupie following on AS, but that is how that place is.  I am not the only one that has seen this and know others that have had to fix his saws for others, thats why he is quick to hush the situation over there. 
Plus the dang prices he ask for a used 346 is near what new was PHO from spike60. JMO
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #4 on: October 06, 2013, 04:47:12 pm »
I was even thinking a 353 and later put a 50cc 346 top on  if they felt they still needed more.
REDNECK Saw Repair Getter Done

Offline Gunrush128

  • 3 cube
  • *
  • Posts: 5
  • Karma: 1
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #5 on: October 06, 2013, 04:55:53 pm »
I messaged spike60 and I'm waiting on his reply now.  I really want a saw that is all OEM.  Eventually, I may mod the muffler and send it out to get ported.  There are a couple I'm watching on eBay, but you just can't tell what you're really buying...  What model Jonsered is equivalent to the 346 and 550xp?  Jonsered saws look sharp... No pun intended...

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #6 on: October 06, 2013, 05:02:35 pm »
2153 and 2253     Make sure.   
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #8 on: October 06, 2013, 05:38:55 pm »
Personally I wouldnt buy rebuild  from nmurph. He knows not to use certain circlips, but yet he keeps installing them in 346 saws he sales.
 Yeah he has a groupie following on AS, but that is how that place is.  I am not the only one that has seen this and know others that have had to fix his saws for others, thats why he is quick to hush the situation over there. 
Plus the dang prices he ask for a used 346 is near what new was PHO from spike60. JMO

Yikes.  I didn't know that.  Will keep that in mind....

I'm no 'groupie'.  My only experience with him was when he sent me some parts for my 350.  Only had me pay shipping.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22012
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: WTB Husqvarna 346xp at a reasonable price
« Reply #9 on: October 06, 2013, 05:56:39 pm »
Personally I wouldnt buy rebuild  from nmurph. He knows not to use certain circlips, but yet he keeps installing them in 346 saws he sales.
 Yeah he has a groupie following on AS, but that is how that place is.  I am not the only one that has seen this and know others that have had to fix his saws for others, thats why he is quick to hush the situation over there. 
Plus the dang prices he ask for a used 346 is near what new was PHO from spike60. JMO

Yikes.  I didn't know that.  Will keep that in mind....

I'm no 'groupie'.  My only experience with him was when he sent me some parts for my 350.  Only had me pay shipping.

He treats folks right on that.
I have just caught onto some things that I keep seeing posted over by folks on purchases and folks I talk to in back ground.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
914 Views
Last post March 02, 2011, 09:12:47 pm
by Cut4fun
44 Replies
3997 Views
Last post July 25, 2019, 09:38:53 am
by Cut4fun .
4 Replies
823 Views
Last post February 08, 2012, 04:48:11 pm
by SawTroll
10 Replies
665 Views
Last post May 24, 2012, 12:56:29 am
by nmurph
0 Replies
1266 Views
Last post February 05, 2013, 05:02:27 pm
by Cut4fun .
1 Replies
271 Views
Last post October 06, 2013, 01:26:57 pm
by Cut4fun .
13 Replies
503 Views
Last post November 02, 2013, 12:01:50 pm
by Cut4fun
4 Replies
369 Views
Last post February 14, 2014, 04:10:00 pm
by Cut4fun .
10 Replies
1088 Views
Last post November 22, 2013, 02:41:13 pm
by Cut4fun
29 Replies
664 Views
Last post July 25, 2014, 11:56:00 am
by farmboy