Author Topic: eager beaver parts  (Read 886 times)

0 Members and 18 Guests are viewing this topic.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada

  • Total Badges: 32
    Badges: (View All)
    Seventh year Anniversary Level 6 Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary Linux User
Re: eager beaver parts
« on: September 01, 2013, 08:12:31 am »
to get it running properly everything revolves around the crank not having any side to side slop. if there is any, don't bother with it. find another one to play with. you can sort of hide the issue by placing the bearings in a little farther to keep the crank 'centered', but it's a temporary fix.
as for the carb kit; i have them for the walbro, so far as i can find. but if i remember correctly, they both use the same rubber bits. the needle and lever are different.
as for the fuel filters; i'll see what i have. haven't come across them yet but i'm sure i have them. they can be saved with a soak in kerosene if they're dried out. they rarely need changing due to being plugged with dirt. they are huge compared to any other filter in a small saw. a real pain to properly change, we used to just throw a new tank in if it was suspect. it isn't something i recommend touching.
i have a couple good used complete pull starters. one yellow, one black. same for the carb covers. i don't think there is any new ones here. i also don't have any new airfilters, but i do have a couple good used ones close to new. they're also still available new from stens for about 5 bux.
when I grow up, i wanna be an adult.

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
995 Views
Last post July 03, 2012, 07:25:57 am
by farmboy
2 Replies
753 Views
Last post February 08, 2013, 10:51:18 pm
by mattinky
21 Replies
1383 Views
Last post August 02, 2013, 05:34:25 pm
by ohioboy15
1 Replies
562 Views
Last post September 05, 2014, 05:54:49 pm
by malty
2 Replies
286 Views
Last post November 06, 2017, 08:25:08 pm
by ray benson
11 Replies
1313 Views
Last post December 26, 2014, 08:04:27 pm
by 660magnum
5 Replies
3632 Views
Last post November 19, 2016, 04:49:12 pm
by BudTuba
3 Replies
1347 Views
Last post July 21, 2016, 11:14:21 am
by Cut4fun .
6 Replies
625 Views
Last post July 28, 2016, 02:52:32 pm
by Cut4fun .
0 Replies
334 Views
Last post May 12, 2017, 10:37:55 pm
by TraceDoty