Author Topic: Gear drive 10 10 Mac (Read 319 times)

Cut4fun . · « **on:** September 12, 2015, 04:46:32 pm »

While the ebay parts seller was here getting 3 saws from me. He told me he had about 600 saws and one of them is a McCulloch 10 10 gear drive. Mac 70 something ? Anyone got info so I can learn about this.

Al Smith · « **Reply #1 on:** September 12, 2015, 08:01:07 pm »

I guess they made them,why I have no idea especially a 10-10 gear drive .I can't imagine what good that would be .

pete · « **Reply #2 on:** September 12, 2015, 08:37:30 pm »

Hi cut I have 4 mac 10 10 geardrives 2 10 g basket case 2x LG6a and a g70 they are now few and far between also there is a 5 10 g Running 1/2 inch chain good machine to acquire for trading as they are so uncommon now. Also check to see if he has any of the electric starts there is the 3 10e 5 10e and 10 10e and super 10 10e mikes site has the details listed and there are some pics in cscf library cheers

Cut4fun . · « **Reply #3 on:** September 12, 2015, 09:09:06 pm »

I can get you his ebay seller info. He said is had the number 70 in it from what I can recall. Hmmm KP outdoors comes to mind off hand.

I know about the electric starts but didnt ask. Was a neat idea back in the day.

pete · « **Reply #4 on:** September 13, 2015, 07:09:04 am »

The Aussie dollars dive into oblivion has all but put a stop to any overseas purchases,getting under 66c usa per aussie dollar but I will check out those site ideas

Eccentric · « **Reply #5 on:** September 13, 2015, 04:05:33 pm »

That saw is likely a G70. There were a number of 54-70cc 10-series gear drives.

I have a 5-10G plus a parts saw and a partial carcass. Will build a nice runner out of the lot at some point. There are many saws ahead of it in the project line. IIRC, it had a 32" or so bar and a loop of 1/2" on it when I got it.

Cut4fun . · « **Reply #6 on:** September 13, 2015, 07:12:57 pm »

I ran some mac gear drive that belonged to Al Smith that impressed the heck out of me. Wasnt like no slow gear drive I ever seen before.

Al Smith · « **Reply #7 on:** September 13, 2015, 07:20:32 pm »

The only reason I can possibley think of for running reduction on a 10 series saw is possibley a lighter weight saw that could handle longer bars .

It would make sense for example how a 700 would have more RPMs than say an 80 or 87 c cc reed engine but it certainly would not have the torque of a reeder .

Al Smith · « **Reply #8 on:** September 13, 2015, 07:22:22 pm »

That was 650 which is 87 cc .That engine runs at over 9,000 under load and it's a two to one reduction .It's dandy but heavy as lead .

mcbob · « **Reply #9 on:** September 14, 2015, 01:12:09 am »

Sounds like a 7-10 with a gearbox the G-70 out here in Australia the railways used them on bridge construction

Chainsaw Repair

News:

Author Topic: Gear drive 10 10 Mac (Read 319 times)

Cut4fun .

Gear drive 10 10 Mac

Al Smith

Re: Gear drive 10 10 Mac

pete

Re: Gear drive 10 10 Mac

Cut4fun .

Re: Gear drive 10 10 Mac

pete

Re: Gear drive 10 10 Mac

Eccentric

Re: Gear drive 10 10 Mac

Cut4fun .

Re: Gear drive 10 10 Mac

Al Smith

Re: Gear drive 10 10 Mac

Al Smith

Re: Gear drive 10 10 Mac

mcbob

Re: Gear drive 10 10 Mac

Related Topics