Author Topic: mac 10 oil pump gasket updated model  (Read 1454 times)

0 Members and 16 Guests are viewing this topic.

Offline pete

  • Gas Hotsaw
  • ******
  • Posts: 500
  • Karma: 37

  • Total Badges: 25
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Level 5 Sixth year Anniversary
mac 10 oil pump gasket updated model
« on: June 28, 2017, 07:13:39 am »
Have any fellow collectors out there got any NOS updated 10 series oil pump gaskets for sale The ones I am talking about seem to be made of rubber or similar compound i have found some on ebay at 13 dollars au which is fine but I balked at the 30 dollars au for postage I sent the seller a message asking about postage but did not get a reply. I have 2 promac 850s which are sucking bar oil into the cylinders causing hydralock. I have dug through some parts saws and found the updated spring clip that was used with these single screw oil pumps but would like to upgrade the gaskets, thanks if anyone can help

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23706
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: mac 10 oil pump gasket updated model
« Reply #1 on: June 28, 2017, 01:08:41 pm »
Link to what you are needing? I dont know macs to know if I find the right gasket you are looking for.


Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: mac 10 oil pump gasket updated model
« Reply #3 on: June 29, 2017, 06:20:15 am »
I'm not certain if all 10 series use the same gasket .If memory serves for example the 700 and the 850 pumps are slightly different . I'll look up the numbers when I get time .
However it might not be the gasket as those pumps have a tendency to pass oil into the crankcase as they age .Most it's just a little puff of white smoke on a start up .Others it might develop  into a hydra lock
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23706
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: mac 10 oil pump gasket updated model
« Reply #4 on: June 29, 2017, 03:57:36 pm »
http://www.ebay.com.au/itm/Mcculloch-Chainsaw-Oil-Pump-Diaphragm-Gasket-92818-NOS-10-Series/122422508425?_trksid=p2481888.c100675.m4236&_trkparms=aid%3D111001%26algo%3DREC.SEED%26a
I'm not certain if all 10 series use the same gasket .If memory serves for example the 700 and the 850 pumps are slightly different . I'll look up the numbers when I get time .
However it might not be the gasket as those pumps have a tendency to pass oil into the crankcase as they age .Most it's just a little puff of white smoke on a start up .Others it might develop  into a hydra lock

See what Al comes up with then we can look at them Pete. 

Those are listed in about 6 places. Sure you cant find some closer?

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: mac 10 oil pump gasket updated model
« Reply #5 on: June 29, 2017, 04:09:16 pm »
You need part number 92818 pump seal(gasket)  for 10-10A Sp 81,800 805 Sp 850 and 850 super .The 700 might be the same but it showed a different part number . BTW I've shipped stuff to Oz .A few years back by US Airmail a small package was 4 dollars US and took 4 days to get there .Going from OZ to Ohio it was 7 dollars  Australian money .
Informative Informative x 1 Useful Useful x 1 View List

Offline pete

  • Gas Hotsaw
  • ******
  • Posts: 500
  • Karma: 37

  • Total Badges: 25
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Level 5 Sixth year Anniversary
Re: mac 10 oil pump gasket updated model
« Reply #6 on: June 30, 2017, 06:19:34 am »
will look around for a few more days locally but so far no luck when i pulled one of the 850s down still had the paper gasket had not had the upgrade fitted and the leak had lead to visible scoring on the piston and a carbon deposit in the exhaust port. I have found a couple of old saws that have the upgrade kit which is a piece of spring steel that puts pressure on the pump in these 1 bolt pumps so would like to get a couple or so of the later rubber style gasket

Offline Nixon

  • 3 cube
  • *
  • Posts: 19
  • Karma: 7

  • Total Badges: 21
    Badges: (View All)
    Level 5 Seventh year Anniversary Sixth year Anniversary 10 Posts Combination Level 4
Re: mac 10 oil pump gasket updated model
« Reply #7 on: June 30, 2017, 03:57:46 pm »
I can check with an aquaintence for you . I know that he has got a lot of nos mcculloch stuff . I'm certain that he has complete oil pump kits . Let me know . He can be a bit hard to approach ,so it may take a while . But ,I did just locate a carb rebuild kit for his 797 ,and gave it to him . So, I think he'll be fairly easy to deal with :) .
Like Like x 1 View List

Offline pete

  • Gas Hotsaw
  • ******
  • Posts: 500
  • Karma: 37

  • Total Badges: 25
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Level 5 Sixth year Anniversary
Re: mac 10 oil pump gasket updated model
« Reply #8 on: July 01, 2017, 07:43:32 am »
It's only the updated gasket that I am after according to an old post of Mc Bobs that I found the 850s received an update kit which was a rbber gasket and a spring steel piece I have a couple of the steel bits from parts saws
Useful Useful x 1 View List

Offline Nixon

  • 3 cube
  • *
  • Posts: 19
  • Karma: 7

  • Total Badges: 21
    Badges: (View All)
    Level 5 Seventh year Anniversary Sixth year Anniversary 10 Posts Combination Level 4
Re: mac 10 oil pump gasket updated model
« Reply #9 on: July 01, 2017, 09:04:37 am »
I'll see if he has just the updated gaskets by themselves . Might take a week ,or two to get an answer from him .
Useful Useful x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
12 Replies
1895 Views
Last post May 08, 2011, 06:11:27 am
by Spike60
6 Replies
1311 Views
Last post February 20, 2024, 07:34:25 am
by Cut4fun .
22 Replies
1532 Views
Last post March 09, 2013, 06:31:32 pm
by don5477
28 Replies
1031 Views
Last post January 15, 2014, 10:10:52 am
by KilliansRedLeo
6 Replies
519 Views
Last post January 26, 2014, 09:13:46 pm
by tommysp61
25 Replies
1581 Views
Last post June 25, 2014, 04:48:31 pm
by KilliansRedLeo
7 Replies
840 Views
Last post January 04, 2019, 12:07:37 pm
by trappermike
9 Replies
606 Views
Last post November 19, 2015, 10:54:31 pm
by RoyM
7 Replies
694 Views
Last post January 31, 2016, 03:15:43 pm
by 3000 FPS
5 Replies
593 Views
Last post February 24, 2019, 06:34:46 pm
by Cut4fun .