Author Topic: Pro Mac 650  (Read 375 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Pro Mac 650
« Reply #10 on: November 23, 2014, 03:58:01 pm »
Diesel or kerosene always elicits a few comments (mainly mumbles under her breath) when I come in the house.

I didn't tell him to bathe in it.  Just run it through the oiler. 
:D


I get more than a few comments when I come back in the house after working on saws.  Guess I come in smelling like kerosene (parts washer), old gas, etc......
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2753
  • Karma: 170
Re: Pro Mac 650
« Reply #11 on: November 23, 2014, 08:14:17 pm »
I used to tell my late wife that a man should smell like gasoline and horse chit .Some how she didn't sgree with me . ;D

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Pro Mac 650
« Reply #12 on: November 24, 2014, 12:21:33 am »
LOL.  I worked on saws this afternoon.  Used the parts washer......and used compressed air to blast the parts dry afterwards.  Got a comment or two when I came in the house.  Washing my work clothes now....
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.