Author Topic: more mac parts  (Read 1016 times)

0 Members and 0 Guests are viewing this topic.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
more mac parts
« on: August 29, 2013, 02:03:11 pm »
so last week i picked up more mcculloch parts







went to pick up a couple parts riding mowers to have extra pieces on hand, ended up in a conversation with the guys next door neighbor who used to own a mcculloch dealership up until 1991. loads to go through for me now :) i now have the largest inventory of mac parts in ontario 8)
there is a bunch of pioneer, jonsered and husky parts in there aswell. but imma not worried about them infecting the good stuff ;D
now i need to go through it all and see what is worth keeping.
anything mini mac related is going to the dump. ;)
when I grow up, i wanna be an adult.

Share on Facebook Share on Twitter


Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: more mac parts
« Reply #1 on: August 29, 2013, 02:07:47 pm »
ended up getting it all free. the gentleman wanted it gone. i offered to buy but he wasnt having any of that. just wanted it gone. cant complain considering theres about $800 in carb kits alone :-*
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: more mac parts
« Reply #2 on: August 29, 2013, 02:22:20 pm »
Dang!!!!!!!!!!!!!!!!!!!!!!
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: more mac parts
« Reply #3 on: August 29, 2013, 02:40:29 pm »
funny, thats what i said when i walked into the back part of his shed ;D
the pm850 and pioneer p50 both run fantastic 8)
when I grow up, i wanna be an adult.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: more mac parts
« Reply #4 on: August 29, 2013, 04:04:24 pm »
I don't know a thing about the Pioneer but that 81 cc 850 will get-er-done in grand style .

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: more mac parts
« Reply #5 on: August 29, 2013, 09:48:57 pm »
al, i used to love having to set one of these up when somebody came through wanting one. bob's mcculloch (st. albert alberta, closed in '89) would sell one maybe every 3-4 months. when i moved here to brockville on., bentons was selling one almost every week. they were cheaply priced ($370ish), so people figured for only 40bux more than a pm700, and anti-vibe to boot, it was the saw to have. and to top that off, what was out from the other companies, this saw flat out hauled a$$ and was cheaper to run and cheaper to fix. even by today's standards, they still make excelent power for their weight. we sold ALOT of them with 18-20" bar/chains :D
the one in the pic run well. the pioneer p50 is close on power, but the 850 still has noticably more torque. keep the chain speed up on the pioneer and they cut very close. almost the same.
the 850 is going to need anti-vibe work soon. their still alright for a good while, but when they start going, it's a downward slope. and she burns a little bar oil on start up.
when I grow up, i wanna be an adult.

Offline pete

  • Piped Saw
  • *****
  • Posts: 493
  • Karma: 37
Re: more mac parts
« Reply #6 on: August 30, 2013, 08:43:13 am »
I sit here drooling green with envy    Looks like a Titan 57 and double eagle 50 sitting on the trailer as well Hope you get a good coil out of it they are hard to find. Congrats on the 850 love mine but she seeps bar oil into the saw and requires plug removal and cranking before being fired up after a long break. Have another to put back together finally got all the bits I wanted. Any bullfrog carb kits

Offline meteorcatcher

  • 3 cube
  • *
  • Posts: 5
  • Karma: 1
  • Location: Abbotsford, BC
Re: more mac parts
« Reply #7 on: September 12, 2013, 08:20:56 pm »
Whoa! don't chuck that mini stuff just yet.  Anything for a mini 25?  :) Or, how about a thrust spring washer for a D44?  Mac part #103718.
Cheers
Poulan 4218
Mac D44
MiniMac 25

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: more mac parts
« Reply #8 on: September 15, 2013, 09:10:47 pm »
Great googly-moogly, what a haul!!!!!

And for free?  Wow am I jealous.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: more mac parts
« Reply #9 on: September 29, 2013, 09:59:25 am »
so going through some of the stuff today...
I have 8 nos coils for the titan 50/57 saws. if anybody needs one let me know as i'm going to throw most of the stuff in the storage shed I have and it'll be a bit of a chore to get to later if it's stuck in there far enough :)
also, if you need something else, let me know so I can look to see if I do have it.
I don't have any 'bullfrog' carbs or kits. actually very little stuff older than the mid--late '70's or so.
throw me a description and a part number. a pic would help as I still have to pick up the rolodex and part books.
there is a sheet load of stuff I still don't know I have ;D
when I grow up, i wanna be an adult.

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
413 Views
Last post February 08, 2013, 10:51:18 pm
by mattinky
3 Replies
159 Views
Last post March 06, 2013, 08:58:55 pm
by 660magnum
4 Replies
630 Views
Last post September 05, 2013, 09:27:45 am
by jcsmith
1 Replies
251 Views
Last post August 30, 2013, 05:44:28 pm
by sharkey
0 Replies
162 Views
Last post January 07, 2014, 11:21:27 pm
by jmester
19 Replies
584 Views
Last post February 24, 2017, 05:14:56 am
by dutchsawdoctor
29 Replies
749 Views
Last post February 02, 2016, 01:39:22 pm
by mowertech
1 Replies
271 Views
Last post June 08, 2014, 08:01:59 am
by jmester
3 Replies
195 Views
Last post October 21, 2014, 06:33:38 pm
by dolmar
7 Replies
249 Views
Last post February 23, 2015, 10:57:17 am
by jmester