Author Topic: Pro mac 46 ,clutch drum . Advice needed  (Read 154 times)

0 Members and 0 Guests are viewing this topic.

Offline Jez33

  • pruner
  • *
  • Posts: 2
  • Karma: 0
Pro mac 46 ,clutch drum . Advice needed
« on: January 19, 2017, 03:05:20 pm »
Hallo,
I need some advice on getting a new clutch drum (sprocket) as on my pro mac 46 the teeth have worn out. I asked a spares dealer and the original drum will cost about 45 plus shipping which makes me think I can be throwing good money after bad, but on looking on ebay n amozon I see there's lots of different drums for as little as 3.50 ..

So my question is,  which modern day chainsaw has the same clutch drum for my  promac  46?

The sprocket has 7 teeth on my saw  but I'm guessing the sizes of the drums can be different too ?

Share on Facebook Share on Twitter


Offline heimannm

  • 3 cube
  • *
  • Posts: 8
  • Karma: 4
  • Location: Iowa
Re: Pro mac 46 ,clutch drum . Advice needed
« Reply #1 on: January 19, 2017, 08:51:15 pm »
ProMac 46 is an Italian made saw, see if you can find an Efco/Olympyk/Oleomac dealer and show them your drum. 

Photos of the saw and the drum might help, depending on where you are in the world there may be other options.

Mark

Offline pete

  • Piped Saw
  • *****
  • Posts: 499
  • Karma: 37
Re: Pro mac 46 ,clutch drum . Advice needed
« Reply #2 on: January 20, 2017, 12:26:58 am »
try get the part number and compare that to some of the other euro macs I have a few of the italian ones and the minimac clutch drum was an exchange. will try have a look on the weekend

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
435 Views
Last post April 14, 2011, 03:57:40 pm
by Cut4fun .
3 Replies
86 Views
Last post January 01, 2013, 12:00:53 pm
by tbone0106
8 Replies
366 Views
Last post January 30, 2013, 09:42:44 am
by Spike60
0 Replies
37 Views
Last post November 02, 2013, 01:56:33 pm
by leec
1 Replies
45 Views
Last post December 10, 2013, 07:40:20 pm
by Cut4fun .
1 Replies
18 Views
Last post May 01, 2014, 08:19:52 pm
by Cut4fun .
21 Replies
441 Views
Last post January 21, 2017, 06:56:48 pm
by 3000 FPS
18 Replies
511 Views
Last post July 27, 2015, 02:48:45 pm
by John Mc
7 Replies
259 Views
Last post April 04, 2016, 11:30:56 am
by srcarr52
9 Replies
204 Views
Last post December 30, 2018, 09:08:12 am
by Al Smith