Author Topic: Pro Mac 805 bar on Super pro 125  (Read 2561 times)

0 Members and 0 Guests are viewing this topic.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Pro Mac 805 bar on Super pro 125
« Reply #10 on: July 09, 2012, 09:41:53 pm »
The 36" on the all yellow 125 is basically the same style Windsor bar as shown with the McCulloch brand on it except it's a Stihl mount .

That one is I think 105 drivers of .404 .The 36" Mcculloch bar I also have uses 109 drivers but both are listed as 36" bars .

The 48" hard nose on the "black beauty"  is 143 drivers yet oddly enough that driver count is what they call a 50" bar in Stihl mount size .So what I'm saying is they all have some degree of variation as to how they determine bar length .

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #11 on: July 09, 2012, 10:20:54 pm »
I would be interested in a chart of the different style mounts.  I have several bars that it would be helpfull to identify.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #13 on: July 10, 2012, 07:39:19 pm »
It helpful, thanks.

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #14 on: July 31, 2012, 10:11:23 am »
The recoil on the 125 is the same as what other saws?  I have a 250 that looks to have the same recoil as my 125 but I really don't want to start taking parts off a nice saw.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Pro Mac 805 bar on Super pro 125
« Reply #15 on: July 31, 2012, 07:17:08 pm »
Unless you break the starter there isn't much that can go wrong with it other than the spring .Even if so often you just heat the end and bend a new hook on it .

I'm certain a 250 recoil will work and suspect just about any left start reed valve like the 300 etc .

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #16 on: July 31, 2012, 10:28:43 pm »
It has a grove worn thru where the pull rope rubs.  Never seen anything like it before.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Pro Mac 805 bar on Super pro 125
« Reply #17 on: August 01, 2012, 04:29:44 am »
Well that can happen ,rarely .

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #18 on: August 31, 2012, 09:03:11 am »
What is the trick to getting the recoil apart so I can fix the spring?  I'm pretty sure it is a simple job or maybe a trick to it?

I got it apart, just needed a better grip.

Offline super44

  • 6 cube
  • ****
  • Posts: 214
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Pro Mac 805 bar on Super pro 125
« Reply #19 on: September 02, 2012, 05:54:52 pm »
I've done enough dinging with this 125 to cut a little wood today ;D.  I set it down to move the log I was cutting and the saw died.  Went to restart it and the recoil spring let go >:(.  What does the spring end look like to keep it in place?

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1782 Views
Last post January 27, 2014, 07:53:16 pm
by jmester
5 Replies
398 Views
Last post July 14, 2016, 08:22:07 pm
by Cut4fun .
3 Replies
509 Views
Last post September 06, 2016, 10:15:43 pm
by Fishnuts2
0 Replies
265 Views
Last post December 08, 2016, 04:14:23 pm
by Cut4fun .
2 Replies
403 Views
Last post May 22, 2017, 04:40:07 pm
by Big_6
4 Replies
195 Views
Last post March 17, 2018, 12:07:25 pm
by Cut4fun .
5 Replies
275 Views
Last post March 21, 2019, 07:04:12 am
by waltergorman
0 Replies
71 Views
Last post March 24, 2019, 11:06:02 am
by Cut4fun .
5 Replies
127 Views
Last post October 22, 2019, 11:24:43 pm
by farmboy
0 Replies
40 Views
Last post April 23, 2020, 01:10:19 pm
by Cut4fun .