It lives ,sort of .I got it back together but because the cylinders are different I had to do some alterations to make it work .
For one the mounting for the coil on the 850 cylinder set it out too far from the flywheel magnets .A little grinding was neccessary ,it worked .A few other incidentals, not that big of a deal .I will say this though of all the ten series I've worked on this one because of the anti vib mounts took me a long time to get back together .I worked on this damned thing about three hours today and normally it's about a half hour job .
The two cylinders are shown in the pic,805 right,850 left .The 850 I opened up a little bit wider than stock and polished it out much better than the pic shows, that was just the rough in .
The carb is screwed up .Takes a prime to get started then if you let it idle down it floods .Carb kit in order ,next week .