Author Topic: 44mm aftermarket 5000 plus and 490 pistons (Read 1530 times)

660magnum · « **Reply #40 on:** September 11, 2014, 12:43:41 pm »

Quote from: aclarke on September 07, 2014, 07:11:50 pm

thanks for the info guys, have a few different pistons on the way, couple 45mm and one 44. the number Shep posted sounds interesting , ill research that #

got the Meteor 46 mm cylinder kit from the Greek Dude!! Nicely made as per usual Meteor quality.[/u]

Cut4fun . · « **Reply #41 on:** September 11, 2014, 12:51:12 pm »

Thanks Jim meteor. Brain is so slowwwwwww anymore. I even read that and it didnt soak in couple days ago.

aclarke · « **Reply #42 on:** September 11, 2014, 12:57:09 pm »

Kev, Meteor makes the cylinder and piston. $125 or so for both

Cut4fun · « **Reply #43 on:** September 11, 2014, 01:05:11 pm »

If I owned those saws. I would be slapping these on as replacements for sure when needed.

You run yours yet?

SawTroll · « **Reply #44 on:** September 11, 2014, 01:28:00 pm »

What I have heard is that the Meteor cylinders are cast in the far east, and then finished and platred in Italy. I don't know for sure if it is true.

aclarke · « **Reply #45 on:** September 11, 2014, 01:44:23 pm »

That's interesting. Did some research and there are quite a few piston and cylinder casting companies in the area surrounding the address where the Greek Dudes company is. Wouldnt surprise me if that was the case. Casting looks very nice

I'm curious if Gilardoni is still producing saw cylinders for husky/stihl?

Cut4fun · « **Reply #46 on:** September 11, 2014, 02:02:15 pm »

They couldnt put Italy on that cylinder could they if it wasnt cast there right?

aclarke · « **Reply #47 on:** September 11, 2014, 03:13:22 pm »

Found an MP (meteor) on the cylinder Casting.

SawTroll · « **Reply #48 on:** September 11, 2014, 06:37:41 pm »

Quote from: aclarke on September 11, 2014, 01:44:23 pm

That's interesting. Did some research and there are quite a few piston and cylinder casting companies in the area surrounding the address where the Greek Dudes company is. Wouldnt surprise me if that was the case. Casting looks very nice

I'm curious if Gilardoni is still producing saw cylinders for husky/stihl?

You could well be right - as I said, I was not entierly convinced by the "story" I told.

Yes, Gilardoni (still) are.

660magnum · « **Reply #49 on:** September 11, 2014, 08:11:18 pm »

I bet it varies by which model cylinder it is?

Chainsaw Repair

News:

Author Topic: 44mm aftermarket 5000 plus and 490 pistons (Read 1530 times)

660magnum

Re: 44mm aftermarket 5000 plus and 490 pistons

Cut4fun .

Re: 44mm aftermarket 5000 plus and 490 pistons

aclarke

Re: 44mm aftermarket 5000 plus and 490 pistons

Cut4fun

Re: 44mm aftermarket 5000 plus and 490 pistons

SawTroll

Re: 44mm aftermarket 5000 plus and 490 pistons

aclarke

Re: 44mm aftermarket 5000 plus and 490 pistons

Cut4fun

Re: 44mm aftermarket 5000 plus and 490 pistons

aclarke

Re: 44mm aftermarket 5000 plus and 490 pistons

SawTroll

Re: 44mm aftermarket 5000 plus and 490 pistons

660magnum

Re: 44mm aftermarket 5000 plus and 490 pistons

Related Topics