Author Topic: partner 500 (Read 1004 times)

man of stihl · « **on:** March 20, 2011, 11:52:26 am »

http://www.youtube.com/user/rjcfritz

man of stihl · « **Reply #1 on:** March 20, 2011, 11:55:46 am »

My first attempt at you tube. This is my own port job on my 500 with 3/8 oregon cl chain.

Cut4fun · « **Reply #2 on:** March 20, 2011, 02:01:44 pm »

Hint on posting youtube here so it's embedded . Look below video and see SHARE , click share, copy paste link here.

http://www.youtube.com/watch?v=7SqvG75URcQ

Cut4fun . · « **Reply #3 on:** May 04, 2015, 01:30:22 pm »

I know other folks have had this happen as I just sent my last 2 outer bar plates out.

Friend loaned his 500 out to a 21 year old know it all (by friends description) that ran the saw so long the chain had got real loose and came off. The guy took apart to try and put chain on. Somewhere in all of this the outer bar plate got lost in the field cutting area.

Guy brought in a Partner 500 today that has lost the outer bar plate between clutch cover and bar. Now when he tightens the cover down it somehow is stopping chain from moving. I never seen this on all the partner 500 5000 jonsered 490 590 poulan 325 I have owned. Personally I used to ditch the outer bar plates myself.

Will dig in later.

Cut4fun . · « **Reply #4 on:** May 04, 2015, 06:26:19 pm »

Fun day. Not.

Front brake locked up on truck in town

. Waiting for everything to cool down on truck. Decided to put new blades and deck back on big rider. Then dug into this partner 500.

I removed everything to check as I go. Bar 050, measured drive link and showing 050. But I wonder what the heck is B2 stamped on the drive links would mean. In my mind I would think 058. Thats why I measured DL. Also chain had some weird 3 circle stamp all over it.

Anyhow. Back together and works fine without the outer bar plate. Just like my saws did.

Loved the sound of the ole girl. Missed that sound. Just a stock saw with baffle pulled out of muffler.

660magnum · « **Reply #5 on:** May 04, 2015, 06:29:47 pm »

The three circles is HD Tri Link Chinese chain

660magnum · « **Reply #6 on:** May 04, 2015, 06:35:31 pm »

TSC sells it too

Cut4fun . · « **Reply #7 on:** May 04, 2015, 06:38:23 pm »

Going by this the chain B2 should be 058. But when I measured lower end of drive link I seen 050 on my calibers. Didnt see 058 till up closer to tie strap area. This could be part of his problem.
I didnt measure the 1.3 050 bar groove though. Maybe wore just enough to be able to use 058 chain.

Thinking HD stuff.

-B1,B1S,B1FT,B1FTS, 050 Gauge,325 Pitch; similar with OREGON 20 series;
--B2,B2S,B2FT,B2FTS, 058 Gauge,325 Pitch; similar with OREGON 21 series;
--B3,B3S,B3FT,B3FTS, 063 Gauge,325 Pitch; similar with OREGON 22 series;

http://www.qiruibar.com/view.php?id=200#

660magnum · « **Reply #8 on:** May 04, 2015, 06:45:49 pm »

On the pdf dwnld from trilink it says .325 .050

Cut4fun . · « **Reply #9 on:** May 04, 2015, 06:58:50 pm »

Quote from: 660magnum on May 04, 2015, 06:45:49 pm

On the pdf dwnld from trilink it says .325 .050

Link? Email if you have to. Thanks.

Chainsaw Repair

News:

Author Topic: partner 500 (Read 1004 times)

man of stihl

partner 500

man of stihl

Re: partner 500

Cut4fun

Re: partner 500

Cut4fun .

Re: partner 500

Cut4fun .

Re: partner 500

660magnum

Re: partner 500

660magnum

Re: partner 500

Cut4fun .

Re: partner 500

660magnum

Re: partner 500

Cut4fun .

Re: partner 500

Related Topics