Author Topic: Partner 5000 plus  (Read 6629 times)

0 Members and 0 Guests are viewing this topic.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Partner 5000 plus
« Reply #50 on: August 24, 2011, 07:02:54 pm »
What do you get by using the 246 piston? Tighter squish?

Wider skirts.
Ok. Which means you can go wider on your ports. Gotcha ;) Thats some good info to have beings 5000 pistons are NLA.
Ron

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Partner 5000 plus
« Reply #51 on: August 24, 2011, 07:22:53 pm »
A 246 piston is also lighter.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 plus
« Reply #52 on: August 25, 2011, 07:01:40 am »
MOS I had to dig, but I found Art's info on the 246 in 5000 info.

Just put a 246 Husky in one. Had to open up the piston bosses. Also had a little concern over the difference in skirt length (246 being shorter) but no running problems. Good idle and great throttle response.

The 5000 has a rod that is 14.54 mm wide. The 246 piston is only 10.45mm between bosses. Had to open that area up. 246 pistons are open sided like a 254 piston with no full skirt.

026 carb has around a 2mm bigger bore, 026 carb on the 5000. Likes it big time.

5000 with 246 piston 026 carb video

http://www.youtube.com/watch?v=k3etDvwcsvE


246 on the right and 5000 on left. Same height and pin size. 2mm shorter skirt.
REDNECK Saw Repair Getter Done

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Partner 5000 plus
« Reply #53 on: August 25, 2011, 04:40:21 pm »
Cool. Thanks for the info 8)
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4013
  • Karma: 158
  • OHIO REDNECK
Re: Partner 5000 plus
« Reply #54 on: August 25, 2011, 07:42:39 pm »
Is this info below accurate?   So I could use 50 51 55 262 etc coils in my partners? Just asking because when I pulled one of coils from the shelf on last project it was dead.  ???

503901401 coil
Fits: Husqvarna: 50, 51, 55, 254, 154, 257, 261, 262, 40, 45, 49, 268, 272  Jonsered: 490, 590, 2050, 2045, 2041, 2051, 2054, 2055, 670   Partner: 500, 5000, 540, Older 55cc 65cc 85cc 100cc saws with Thyristor and Ignitron ignition coils.  On some models the spark plug wire may be too short, and you would have to swap out with your old coil wire.
REDNECK Saw Repair

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Partner 5000 plus
« Reply #55 on: August 25, 2011, 08:11:55 pm »
I do know that a partner 500/5000 coil will work on a Husky 257 and a Poulan Pro 505. The 505 coil wont work in the 500 unless you lengthen the coil wire. That coil on your 505 is a partner 500 coil BTW.  ;)
Ron
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4013
  • Karma: 158
  • OHIO REDNECK
Re: Partner 5000 plus
« Reply #56 on: September 02, 2011, 03:07:35 pm »
Being I havent seen a partner 5000H in the US and only seen a top cover for sale once, (wish I would have bought it now).  So I made my own heated handle 5000.
No it's not right yet due to not having enough tubing on hand, to short. So  I made a temp fix to hook everything and test it out. Works but dont no how long the fuel line will take the heat  ;D.





REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4013
  • Karma: 158
  • OHIO REDNECK
Re: Partner 5000 plus
« Reply #57 on: September 02, 2011, 03:09:43 pm »

REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4013
  • Karma: 158
  • OHIO REDNECK
Re: Partner 5000 plus
« Reply #58 on: November 05, 2011, 02:54:24 pm »
MM, I have placed 2 orders now with Jack's since (another this week  :-[ ) and both times I forgot to add the dang heated handle tubing's. 
I just remembered this last night when for some reason heating handle tubing popped in my mind and if I could kick my own butt I would have.   

Someday  ::)

Ordertree shows the heated handle tune in stock still http://www.ordertree.com/catalog/product/view/id/98733/s/hop-506020801/

506020801 $30.29
REDNECK Saw Repair

Offline ior10

  • pruner
  • *
  • Posts: 4
  • Karma: 1
Partner 5000+
« Reply #59 on: September 11, 2012, 05:18:25 pm »
Hi
I have become the owner of a partner 5000 + that is broken

Poor compression 50 psi

What I want to know. How to connect fuel line, vent, impulse
photos please
Thanks

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
460 Views
Last post February 13, 2013, 06:47:50 am
by Cut4fun .
5 Replies
619 Views
Last post June 26, 2013, 08:03:18 pm
by Cut4fun .
6 Replies
376 Views
Last post April 21, 2012, 12:09:45 pm
by rms61moparman
2 Replies
375 Views
Last post June 26, 2013, 07:26:21 pm
by Cut4fun .
7 Replies
608 Views
Last post August 03, 2014, 09:11:26 pm
by Cut4fun .
10 Replies
1842 Views
Last post February 11, 2014, 12:46:47 pm
by Cut4fun .
8 Replies
749 Views
Last post December 08, 2014, 01:38:13 am
by Gypo Logger
4 Replies
372 Views
Last post September 21, 2015, 02:15:01 pm
by jeff.lary
7 Replies
355 Views
Last post December 27, 2015, 08:13:11 pm
by jeff.lary
2 Replies
241 Views
Last post April 02, 2017, 06:36:15 pm
by KLRTom