Author Topic: Partner 5000 service manual  (Read 2406 times)

0 Members and 0 Guests are viewing this topic.

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Partner 5000 service manual
« on: December 24, 2011, 02:54:51 pm »
I am new to your forum and I just want to say Hi and thanks for letting me join in. I was chasing down a repair /service manual for my saws I own 3 of the 5000 plus's. In chasing down this info I was led to a post on this site where a person had shown someone a picture of his service manual.    Then I joined this site so I could ask him if he knew how I could find one as well.
While waiting for the approval to join in here, I posted the question on another forum "Tractorbynet." I got a responce from the person that also belongs to this site as well. As we speak I am in the process of buying one a "soft cover edition" from e-bay. I just hope it will have the same info as the one pictured in "cut4fun's" post. Well thanks again and have a Merry Christmas.

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4337
  • Karma: 189
  • OHIO REDNECK
Re: Partner 5000 service manual
« Reply #1 on: December 24, 2011, 07:17:48 pm »
The link I posted for you is the one I have now. Same work shop service manual. The Pioneer / Partner and Partner manuals are the same.

Merry Christmas too and got to love those 5000's .  I think there was 1 woods ported 5000, 1 stock  5000,  1 parts saw 5000 and a 490 for sale here too. Check for sale area.
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22582
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 service manual
« Reply #3 on: December 25, 2011, 12:04:09 pm »
Yes I did buy it , well my Neice's husband did really I have never bought anything on e-bay but he does all the time so I asked him to get it for me.So as we speak it is on it's way to St Albans Me . I have never seen a service manual is this what a shop / dealer would use?Does it give soloutions to problems like poor idle or staling ect?
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22582
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 service manual
« Reply #4 on: December 25, 2011, 01:33:38 pm »
Yes and that is where I learned the trick of holding the topend still through the crankcase with a hex wrench years ago. Didnt have to use a piston stop or rope trick through the sparkplug hole anymore.
REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 service manual
« Reply #5 on: December 25, 2011, 03:20:29 pm »
I will have to look for that trick i guess i just did the rope trick to take off a clutch to clean the crap from behind.Rewired a couple of the saws switchs and replaced an anti vibe starp on one of them I will be ready for the woods tomorrow.

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 service manual
« Reply #6 on: January 03, 2012, 07:04:57 pm »
Well I got my Partner 5000 / 500 service manual my nephew bought it for me from e-bay.
In the mean time I have accidently run over one of my 5000's  I destroyed the "D" handel ,chain brake cover and recoil cover. I had enough spare parts to rebuild most of it but I will need a chain brake cover.Does anyone have a chain brake cover they would part with? Actuall I would take 2 if I could get them/ you never know.
I have searched and joined 2 other sites but still no luck finding parts.I have joined Chainsaw repair.I will begin looking at old saw shops in my area in Central Maine to see if any are lying about.If anyone knows a good place to look let me know and I will check it out. This was pasted  by me from the Tractorbynet forum when it was pointed out to me that I had not made this request here.Thanks Jeff
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
Partner 5000

Started by Cut4fun « 1 2 ... 7 8 » Partner

75 Replies
7437 Views
Last post May 17, 2021, 07:51:31 am
by Cut4fun .
4 Replies
519 Views
Last post July 14, 2011, 02:16:37 pm
by Cut4fun .
5 Replies
303 Views
Last post December 18, 2011, 09:38:59 am
by peppone
1 Replies
220 Views
Last post April 28, 2012, 08:33:30 am
by Cut4fun .
6 Replies
249 Views
Last post July 17, 2012, 05:39:05 pm
by Cut4fun .
2 Replies
515 Views
Last post February 13, 2013, 06:47:50 am
by Cut4fun .
4 Replies
419 Views
Last post September 21, 2015, 02:15:01 pm
by jeff.lary
2 Replies
309 Views
Last post April 02, 2017, 06:36:15 pm
by KLRTom
2 Replies
32 Views
Last post April 09, 2017, 05:38:52 pm
by Cut4fun .
Partner 5000 Oiler

Started by DickT « 1 2 » Partner

12 Replies
265 Views
Last post December 28, 2020, 09:06:00 am
by Al Smith