Author Topic: Partner 550 S55 P55 F55 65 650 P70 7000  (Read 10444 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner S65
« Reply #70 on: April 26, 2017, 08:37:31 pm »
Found in a bag given to me by the last owner. Appears to be a part of a e-clip

Looking at the IPL it shows a starter pulley e-clip. But for the life of me didnt see it while the recoil was off today.

Partner Starter E Clip 297917

Found just a side piece in the bag.

Updated part #  505297917 

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner S65
« Reply #71 on: April 30, 2017, 03:57:32 pm »
Figured out the above e-clip and why I didnt see it before. Just the piece in bag. Goes around and through the pulley to hold on. Also found the other bigger piece stuck to the flywheel magnet.

 Was wondering what it looked like run at 25:1 since 1 Nov 1985 Plug above. Piston and rings nice. He said he always used non ethanol mix.

 Where e-clip goes around and through.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner S65
« Reply #72 on: July 26, 2017, 08:37:40 pm »
While I was selling this saw I did learn something. I knew D009 took the place of D010 mount they came with new. 

But when you try and use a D009 72DL the tensioner dont have the travel and chain will be loose.  You have to drill the D010 tensioner hole back on the D009 bar so they will work.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner S65
« Reply #73 on: October 11, 2017, 09:05:51 pm »
Took this partner s65 65cc back in trade today. To heavy for new owner with bad back.

It will be for sale again with yellow clutch cover that was on a partner 550 at one time.  Has 20" older oregon powermatch set up as shown in pics. $120 to move it.

pic

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner S65
« Reply #74 on: October 20, 2017, 08:23:16 pm »
Took this partner s65 65cc back in trade today. To heavy for new owner with bad back.

It will be for sale again with yellow clutch cover that was on a partner 550 at one time.  Has 20" older oregon powermatch set up as shown in pics. $120 to move it.

pic


updated pics with yellow cover. Checked psi today 130 and piston pics.










REDNECK Saw Repair Getter Done

Online ray benson

  • 5 cube
  • ***
  • Posts: 130
  • Karma: 63
  • Retired Industrial Electrician
  • Location: Indiana
Re: Partner S65
« Reply #75 on: November 20, 2017, 07:43:06 pm »
Partner e-clip for starter - photo is out of a Partner service manual.

[ Guests cannot view attachments ]
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 550 S55 P55 F55 65 650 P70 7000
« Reply #76 on: August 21, 2018, 01:28:17 pm »
That tag along saw I got with the pp415 turned out to be a partner P55 and not a S55 I thought it was.  First P one I have had and seen.

http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/0124f71c2116551488256afd004f769f?OpenDocument
Link says New 55cc version of R16. Features built in decompression system located at exhaust port. Named "T Port" system.

In back of pic.  I dont see any differences in it unless it is something to do with piston and cylinder. No clue. 

Recoil is apart, spring and rope out.  Turns over and feels like good psi though.  Guy said it ran.

saving info

Starter Spring For PARTNER # 295108
Replaces Part Numbers PARTNER 295108
OEM Numbers : 295108  505295110
Type : Starter Spring
Description : REPLACES: PIONEER/PARTNER 295108, PRIME LINE 7-03488 & STENS 625-350.FITS PARTNER MODELS: R16, 17, 18, 22, 30, 40, F55, K16, 20, 65, 650, 850, 1200, P55, 70, 100 & 7000.


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 550 S55 P55 F55 65 650 P70 7000
« Reply #77 on: September 06, 2018, 05:25:15 pm »
pics

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 550 S55 P55 F55 65 650 P70 7000
« Reply #78 on: August 01, 2019, 10:45:44 am »
Saving the partner t port manual info

REDNECK Saw Repair Getter Done

Offline Midpines

  • 3 cube
  • *
  • Posts: 9
  • Karma: 2
Re: Partner 550 S55 P55 F55 65 650 P70 7000
« Reply #79 on: August 01, 2019, 10:25:18 pm »
I've never seen or heard of a Partner saw here in California, Montana, or Colorado. 

They look heavy, but would last a lifetime.

 

Related Topics

  Subject / Started by Replies Last post
45 Replies
3680 Views
Last post September 22, 2015, 06:37:09 pm
by The Ripper
17 Replies
1358 Views
Last post February 16, 2020, 08:29:07 am
by Cut4fun .
partner 500

Started by man of stihl « 1 2 » Partner

18 Replies
1215 Views
Last post July 06, 2015, 05:35:27 pm
by aclarke
0 Replies
759 Views
Last post April 13, 2012, 01:45:51 pm
by man of stihl
5 Replies
582 Views
Last post February 15, 2013, 01:18:19 pm
by niel logman
7 Replies
633 Views
Last post June 09, 2013, 08:34:40 am
by HMLT360Pro
4 Replies
748 Views
Last post September 21, 2013, 05:54:01 pm
by Cut4fun
10 Replies
1855 Views
Last post February 11, 2014, 12:46:47 pm
by Cut4fun .
6 Replies
205 Views
Last post September 07, 2016, 05:26:30 pm
by Cut4fun .
2 Replies
156 Views
Last post December 19, 2017, 05:29:05 am
by Al Smith