Author Topic: partner 55cc 65cc 70cc 85cc 100cc  (Read 1730 times)

0 Members and 0 Guests are viewing this topic.

Offline chainsman1

  • 5 cube
  • ***
  • Posts: 105
  • Karma: 8
partner 55cc 65cc 70cc 85cc 100cc
« on: February 01, 2012, 07:06:33 pm »
55,65,70,85 and 100cc old partners, they have all the same stroke with different bores. are the cylinder juggs all interchangeable??

i do know the s55 partner would take a 65 cc top end,but dont know for the others

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21860
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #1 on: February 01, 2012, 07:20:04 pm »
I found out in my searching on my 550 the 650 and 7000 fit. I dont think the others do.
REDNECK Saw Repair Getter Done

Offline chainsman1

  • 5 cube
  • ***
  • Posts: 105
  • Karma: 8
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #2 on: February 01, 2012, 07:45:08 pm »
ok,same stroke,but 85 and 100 would have different cases i guess...

Offline timberdollars

  • 3 cube
  • *
  • Posts: 6
  • Karma: 0
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #3 on: February 21, 2012, 11:09:01 am »
Partner small case PRO cases with oil adjuster hole in bottom will take ANY cylinder from 55cc to 70cc. Semi pro cases either black or yellow with bolt on oil housing on bottom take 55cc to 65cc. Pro cylinders have wider cylinder sleeves and will not fit non pro cases. K65/K650/K700 cut off saws cylinders also will fit Pro cases.

Pro cases: P55/P70/7000/7000+/cs550/Cs650/Cs7000 all have oil hole on bottom.

85cc to 1000cc are for those saws only!!!!!!!!!!!!!!!!

A S50 F55 or S55 upgrade to 65cc is easy and very rewarding!!!!!!!!!!! both open and closed port pull good, also all older R series cases will except 65cc cylinders regardless of year. (r16-R517 or more)

I keep seeing saws advertised as P65??? no such animal that I'm aware of.  Pioneer Partner 650 YES!! P65 are most likely S65 or R series.


Duane

Offline chainsman1

  • 5 cube
  • ***
  • Posts: 105
  • Karma: 8
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #4 on: March 04, 2012, 09:47:41 pm »
Is it possible to fit a 70cc top end on a semi pro bottom by boring the cases?   I guess the bolt pattern would fit

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #5 on: April 27, 2012, 10:53:14 am »
55, 65 and 70cc have a 36mm stroke.

85 and 100cc have a 40mm stroke, despite what Acres site state.

Btw, the cc numbers are not accurate.

Offline chainsman1

  • 5 cube
  • ***
  • Posts: 105
  • Karma: 8
Re: partner 55cc 65cc 70cc 85cc 100cc
« Reply #6 on: May 14, 2012, 12:29:29 pm »
i was playing in my partner junkpile yesterday,and found a 55cc partner with an aluminum spacer between the exhaust port and the muffler. its about 1/4 inch thick.   some saws have it,some dont. i wonder what it was for...

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1007 Views
Last post April 24, 2011, 02:10:10 am
by mcbob
13 Replies
751 Views
Last post August 07, 2012, 11:13:18 pm
by EHP
1 Replies
437 Views
Last post September 29, 2012, 09:23:33 pm
by 660magnum
1 Replies
430 Views
Last post January 21, 2013, 10:54:31 pm
by RoyM
9 Replies
293 Views
Last post August 04, 2013, 07:53:04 pm
by Cut4fun .
2 Replies
618 Views
Last post February 27, 2014, 10:14:22 am
by 660magnum
106 Replies
2596 Views
Last post October 11, 2014, 08:09:31 am
by mdavlee .
0 Replies
325 Views
Last post October 13, 2016, 09:05:35 pm
by dannyupsolate
2 Replies
123 Views
Last post July 12, 2017, 07:19:21 pm
by Cut4fun .
4 Replies
74 Views
Last post October 21, 2017, 05:43:00 pm
by Cut4fun .