Author Topic: Partner P100 Super  (Read 2349 times)

0 Members and 0 Guests are viewing this topic.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Partner P100 Super
« Reply #20 on: June 21, 2018, 05:52:55 am »
If I recall correctly the one Adam Clark built for Wojo had a different coil than in the picture .I have no idea what became of that saw or Wojo for that matter .The last I saw either one was over near Meadville Pa .

Scott didn't have a short bar to fit it so I took along both a Husqvarna bar and a McCulloch 16 inch bar but we couldn't get the thing started .Evidently unknown to us one of the coil wires was shorted out .I heard later they got it running which it did good .Damned thing was about like rope starting a Harley .I didn't get a picture of it but maybe someone did .
Like Like x 1 View List

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: Partner P100 Super
« Reply #21 on: June 21, 2018, 06:52:29 am »
If I recall correctly the one Adam Clark built for Wojo had a different coil than in the picture .I have no idea what became of that saw or Wojo for that matter .The last I saw either one was over near Meadville Pa .

Scott didn't have a short bar to fit it so I took along both a Husqvarna bar and a McCulloch 16 inch bar but we couldn't get the thing started .Evidently unknown to us one of the coil wires was shorted out .I heard later they got it running which it did good .Damned thing was about like rope starting a Harley .I didn't get a picture of it but maybe someone did .
Yeah, this saw has ties to Ohio, but I think may have come from out state, IIRC Wojo lived right nearby me.....

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21880
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner P100 Super
« Reply #22 on: June 21, 2018, 07:34:02 am »
I dont recall what that one looked like at all that Adam built for wojo back then. Think that NWPA gtg was 2010.  Last I saw of it.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Partner P100 Super
« Reply #23 on: June 22, 2018, 04:38:37 am »
Since this thread was started I now have two of this model .One is running although it needs a set of rings .The other is a work in progress .
Like Like x 1 View List

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Partner P100 Super
« Reply #24 on: January 17, 2020, 02:57:38 pm »
It's been a year and a half and I'm kind of slow of late .I think in that time I've got all the parts rounded up including another totally intact crankcase with the rotating assembly to finish two saws from three crankcases .Two sets of piston rings are in transit as I type .
By doing a lot of research I found the sizes for the seals which are relatively common metric size .I don't think I need bearings.I even found the original nut that holds the top cover on which surprised me .The P100 Partner/McCulloch SP 1000  was never a popular saw  in these parts so parts locally are non existent .I've resurrected a lot of saws from the dead pile but these two have been the most challenging so far .These saws in 1983 were upwards of $700 so it most likely was prohibitive for  the normal chainsaw user .Plus the size as 100 cc saws just didn't get used in that time period except by loggers and this is not high impact  logging ,corn fields as far as the eye can see .
I did manage to find an original factory manual from another web forum with parts lists and information on Partner chainsaws and cut off saws .At least I'm not totally flying blind which I often have to do .I always get it but it might take  time to figure out .
Like Like x 2 View List

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Partner P100 Super
« Reply #25 on: February 08, 2020, 11:15:31 am »
I might point out to those interested the P-100 is almost the same as the Partner K1200 concrete saw .In this area Partner was not a front runner on chainsaws but they were a very popular concrete saw .Finding parts has been a problem using the older Partner numbers but since Husqvarna took over if you insert the Husky numbers you can find them .For example just recently I thought perhaps new piston pin bearings might be a good idea .On a search on the net from online suppliers they wanted 40 bucks a pop for them but a search on flea bay I have two in transit at 12 a pop with free shipping using the Husqvarna part numbers .Some times if you are lucky there is more than one way to skin the same cat . ;D
Useful Useful x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Partner P100 Super
« Reply #26 on: February 08, 2020, 09:00:37 pm »
So then are there any of the Husqvarna concrete saws that are the same as the P-100.
PP 505, 475, 445.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2746
  • Karma: 164
Re: Partner P100 Super
« Reply #27 on: February 15, 2020, 07:41:46 pm »
I'm not exactly sure although some of them use basically the same model numbers .For example K1200 Partner .While I have the Partner and McCulloch parts numbers the only way I know is what I find on the internet .I don't have anything that covers Husqvarna concrete saws .Believe me I've spent hours trying to get info on these things .
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan S25DA super 25

Started by Cut4fun « 1 2 ... 7 8 » Poulan

76 Replies
6128 Views
Last post December 23, 2015, 03:36:20 pm
by Eccentric
12 Replies
3625 Views
Last post March 10, 2013, 06:29:23 am
by Al Smith
20 Replies
1325 Views
Last post March 14, 2013, 03:34:43 pm
by dutchsawdoctor
028 Super value?

Started by Vance in AK « 1 2 » Stihl

10 Replies
356 Views
Last post August 04, 2013, 07:24:24 pm
by Al Smith
029 Super

Started by davbell22602 « 1 2 3 4 5 » Stihl

42 Replies
661 Views
Last post September 03, 2013, 05:41:07 pm
by davbell22602
4 Replies
219 Views
Last post October 24, 2013, 02:39:40 pm
by JohnG28
3 Replies
262 Views
Last post November 12, 2013, 04:23:49 pm
by Adirondackstihl
Mac super 250

Started by thefox48 « 1 2 » McCulloch

13 Replies
838 Views
Last post March 12, 2014, 07:38:30 pm
by Al Smith
10 Replies
1856 Views
Last post February 11, 2014, 12:46:47 pm
by Cut4fun .
9 Replies
632 Views
Last post December 14, 2015, 07:23:53 pm
by Al Smith