Author Topic: Partner P100 Super  (Read 2333 times)

0 Members and 0 Guests are viewing this topic.

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Partner P100 Super
« on: August 27, 2011, 10:03:38 pm »
Thought you guys would like to see the big Partner that found its way here.

Its in nice shape and runs like new.

Share on Facebook Share on Twitter

Like Like x 1 View List

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner P100 Super
« Reply #2 on: August 27, 2011, 11:19:21 pm »
I've looked at them and looked over a Adam Clarke built piped one. I'v just never pulled the trigger on the ones I have been offered in trades and to buy pretty dang cheap.

 I think I have ran a stock one that was for sale in Pa a few years back at a gtg.  Al was there maybe he ran it too.
So much going on with the race stuff back then I didnt log it in my brain how it did.

So what do you feel they compare too in a 100cc saw?
REDNECK Saw Repair Getter Done

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2740
  • Karma: 162
Re: Partner P100 Super
« Reply #3 on: August 28, 2011, 10:12:02 am »
Those things never show up then all the sudden over in Pa about 5 or more were there .They seemed to run okay but I don't think quite as well as a 2100 Husky which is exactly the same 99 cc's .

The one Adam did up was like rope starting a Harley .We couldn't get it to fire that day for some reason .Evidently there was  a wire pinched or disconnected .With the hub hub of activites I failed to find the problem and Wojo had to go on a service call someplace in Ohio so he had to boogie  before we figured it out .

I would have liked to have seen what the thing had though .Adam as usual did a fantastic job on the mods .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2740
  • Karma: 162
Re: Partner P100 Super
« Reply #4 on: August 28, 2011, 10:21:21 am »
Another thing you have to remember is that cut times over cants doesn't  really mean that much .I imagine a stock P100 or 2100 Husky for that matter will cut in the 10's .

Now in the woods that means very little especialy in the large wood these things were designed to run in .You get into stuff 24-30 inches and bigger that's were that larger displacement gets-er-done .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4013
  • Karma: 158
  • OHIO REDNECK
Re: Partner P100 Super
« Reply #5 on: August 28, 2011, 10:32:00 am »
I had tested the P100 in that oak log you were sitting on Al. The one you kept chewing up during the day.

I new better then to put it in a racing cant.  ;)
REDNECK Saw Repair

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2740
  • Karma: 162
Re: Partner P100 Super
« Reply #6 on: August 28, 2011, 11:06:26 am »
Now that big old petrified log was a tough nut to crack .If ye olde saw could chew through that thing there wouldn't be any thing on the planet it couldn't saw .Something like that is a good test . Seperates the race horses from the Clydesdales .

That thing had grain going 40 different directions ,just one big knot .

One of the guys from Va had a chain he wanted to test on a saw with some torque so he ran it on my Sp 81 Mac .Whatever he did to it worked out fine because under power with a saw that really didn't lose RPMS like some racers . It kept on chewing out big chips .Done good with the file .

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Partner P100 Super
« Reply #7 on: August 28, 2011, 07:21:09 pm »
Here is the log, Al, Kevin, and a really fast 262. ;) http://www.youtube.com/watch?v=QNSldFuOn5I
Ron

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2740
  • Karma: 162
Re: Partner P100 Super
« Reply #8 on: August 28, 2011, 07:46:50 pm »
I thought the thing was bigger than that .Shows ya how good my memory is and there I was  sitting on the thing .Maybe there were several logs ?

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Re: Partner P100 Super
« Reply #9 on: August 28, 2011, 09:06:27 pm »
Those things never show up then all the sudden over in Pa about 5 or more were there .They seemed to run okay but I don't think quite as well as a 2100 Husky which is exactly the same 99 cc's .

The one Adam did up was like rope starting a Harley .We couldn't get it to fire that day for some reason .Evidently there was  a wire pinched or disconnected .With the hub hub of activites I failed to find the problem and Wojo had to go on a service call someplace in Ohio so he had to boogie  before we figured it out .

I would have liked to have seen what the thing had though .Adam as usual did a fantastic job on the mods .

Al, these P-100 run good, there no slouch. I had a Husky 1100 a short time back and let it go but the P-100 would have hung right with it I suppose.

I do like the way the P-100 is built compared to the Husky though. Not knocking the Husky, just like some things about the Partner better. I also just picked up a Mac PM1000 which is a relabeled Patner P100.

I'll post a picture of it as well.

 

Related Topics

  Subject / Started by Replies Last post
Poulan S25DA super 25

Started by Cut4fun « 1 2 ... 7 8 » Poulan

76 Replies
6080 Views
Last post December 23, 2015, 03:36:20 pm
by Eccentric
12 Replies
3580 Views
Last post March 10, 2013, 06:29:23 am
by Al Smith
20 Replies
1322 Views
Last post March 14, 2013, 03:34:43 pm
by dutchsawdoctor
028 Super value?

Started by Vance in AK « 1 2 » Stihl

10 Replies
356 Views
Last post August 04, 2013, 07:24:24 pm
by Al Smith
029 Super

Started by davbell22602 « 1 2 3 4 5 » Stihl

42 Replies
661 Views
Last post September 03, 2013, 05:41:07 pm
by davbell22602
4 Replies
219 Views
Last post October 24, 2013, 02:39:40 pm
by JohnG28
3 Replies
262 Views
Last post November 12, 2013, 04:23:49 pm
by Adirondackstihl
Mac super 250

Started by thefox48 « 1 2 » McCulloch

13 Replies
831 Views
Last post March 12, 2014, 07:38:30 pm
by Al Smith
10 Replies
1842 Views
Last post February 11, 2014, 12:46:47 pm
by Cut4fun .
9 Replies
626 Views
Last post December 14, 2015, 07:23:53 pm
by Al Smith