Author Topic: Partner R16  (Read 170 times)

0 Members and 0 Guests are viewing this topic.

Offline The Ripper

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 14
Partner R16
« on: June 30, 2019, 12:09:10 pm »
This saw wasn't getting any gas and I found that the fuel filter was clogged up. It was a fiber type(with a c-clip hold it in place) and had to  cut it off from the plastic element and being an old saw,I can't find a stock replacement. What would be a suitable filter for this saw?

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner R16
« Reply #1 on: June 30, 2019, 12:37:08 pm »
Partner R16 IPL   http://s30387.gridserver.com/partsDiagrams/Partner%20R16.pdf

Never had one so looking too.   oem 315148   

Can you just put one of these in the fuel line?   I use these in many saws as replacements. 2 different sizes I get for chainsaws.  125-528  https://www.walbro.com/products/in-tank-fuel-filters/

more info with walbro part numbers and specs.  https://www.walbro.com/wp-content/uploads/2017/05/Walbro_In-tank_filter_PS_EN.pdf

I cant tell if that # I gave for the walbro is the bigger one. So check.
REDNECK Saw Repair Getter Done

Offline The Ripper

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 14
Re: Partner R16
« Reply #2 on: June 30, 2019, 04:09:14 pm »
Thanks, gotta measure inlet, i think the partner is 4.5mm not 5.5.

Offline The Ripper

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 14
Re: Partner R16
« Reply #3 on: June 30, 2019, 04:20:25 pm »
Partner R16 IPL   http://s30387.gridserver.com/partsDiagrams/Partner%20R16.pdf

Never had one so looking too.   oem 315148   ( are you saying you never had a Partner r16? This saw is so smooth, powerful for it's size and very,very light.)

Can you just put one of these in the fuel line?   I use these in many saws as replacements. 2 different sizes I get for chainsaws.  125-528  https://www.walbro.com/products/in-tank-fuel-filters/

more info with walbro part numbers and specs.  https://www.walbro.com/wp-content/uploads/2017/05/Walbro_In-tank_filter_PS_EN.pdf

I cant tell if that # I gave for the walbro is the bigger one. So check.

Offline The Ripper

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 14
Re: Partner R16
« Reply #4 on: July 01, 2019, 09:36:58 am »
Stihl dealer down the road from me had one  for the partner
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner R16
« Reply #5 on: July 01, 2019, 10:52:59 am »
Stihl dealer down the road from me had one  for the partner

Can you show what you ended up with? If cant post it send me email and I will.
REDNECK Saw Repair Getter Done

Offline The Ripper

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 14
Re: Partner R16
« Reply #6 on: July 01, 2019, 12:39:03 pm »
Walb 125-528-1  The original had a tighter fit but this filter will work. Now I need a coil wire ,still runs but it needs one

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner R16
« Reply #7 on: July 01, 2019, 05:43:24 pm »
Walb 125-528-1  The original had a tighter fit but this filter will work. Now I need a coil wire ,still runs but it needs one

Thats the one I showed above. 

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
1856 Views
Last post February 11, 2014, 12:46:47 pm
by Cut4fun .
4 Replies
446 Views
Last post November 25, 2014, 12:17:42 am
by 3000 FPS
Partner P85

Started by wkend lumberjak « 1 2 3 » Partner

22 Replies
834 Views
Last post December 12, 2014, 10:33:16 pm
by awol
0 Replies
519 Views
Last post December 27, 2014, 10:43:08 pm
by Cut4fun .
8 Replies
540 Views
Last post February 08, 2017, 03:49:40 pm
by Cut4fun .
Partner 510

Started by tyui Partner

1 Replies
215 Views
Last post March 14, 2017, 03:06:25 am
by nenicu
7 Replies
243 Views
Last post September 27, 2017, 08:10:25 pm
by Cut4fun .
5 Replies
172 Views
Last post October 19, 2017, 08:40:34 am
by Cut4fun .
2 Replies
156 Views
Last post December 19, 2017, 05:29:05 am
by Al Smith
1 Replies
125 Views
Last post November 26, 2018, 02:03:19 pm
by ray benson