Author Topic: Source for Partner 500 / 5000 crankshaft seals?  (Read 206 times)

0 Members and 0 Guests are viewing this topic.

Offline jeff.lary

  • 4 cube
  • **
  • Posts: 37
  • Karma: 5
Source for Partner 500 / 5000 crankshaft seals?
« on: September 21, 2015, 08:37:28 am »
Hi guys I am still having issues with the 500 starting hard . It is either the Metering lever set too high now,... or maybe seals. I know they should present two different running problems( Carb = flooding / seals = revving) but I am thinking out loud here.
  If the lever is too high and it may well be well that's an easy fix. I set it with a Walbro tool so it should be ok but the saw started hard this last weekend maybe 10 pulls again? Then when I got her running I was waiting for it to warm up so I could check the adjustment made to the carb but when I picked the saw up and it tilted it immediately changed idle pitch. It stalled out really so when I re-started it I tried turning it left right and upside down and the running changed a little I think? Although I may be just imagining problems as I am maybe over thinking this some?

 Now about 2 weeks ago I bought a 5000 that needs seals I know that for sure that is why the guy sold it, and I was going to do them this winter,.. most likely I still will.  I was thinking I should get 2 sets of seals while I am at it . The last time I bought seals I got them from my old partner dealer. I was doing bearings too at that time but now I am looking at just seals .
 I am wondering if there is a source for seals elsewhere as well as maybe a seal part number? Just incase I need to look someplace else.
 One other thing I have a road kill screwdriver I found and I want to turn it into a homemade seal puller. Does anyone have a picture of one they have made so I can see what I need to make for a grove in the tip? Thanks for your help / advice Jeff

Social Buttons


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17952
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Source for Partner 500 / 5000 crankshaft seals?
« Reply #1 on: September 21, 2015, 01:01:48 pm »
Should be common seal and bearings.  I cant remember off hand. But do remember they were common.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17952
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Source for Partner 500 / 5000 crankshaft seals?
« Reply #2 on: September 21, 2015, 01:10:06 pm »
738220225   Crankshaft main bearing for Husqvarna chainsaws.
    Husqvarna 39, 40, 45, 49, 50, 51, 55, 61, 66, 140 B, 143 B, 145BT, 153 R , 154, 155B, 155BT, 165, 254, 257, 261, 262, 266, 268, 272, 357, 359, 362, 365, 371, 372, 480, 575
    Jonsered 2041, 2045, 2050, 2051, 2054, 2055, 2063, 2065, 2071, CS2171

Wasnt it a 6202?


seal 505275719  HUSQVARNA 357  359 346XP 362XP 365 . check I cant remember but thinking took same seal both sides on 500 5000. 




REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17952
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Source for Partner 500 / 5000 crankshaft seals?
« Reply #3 on: September 21, 2015, 01:12:13 pm »
Go to Jacks small engines online. Run the poulan pro 325 for parts. They will usually be cheaper under poulan name.

I forgot link  http://www.jackssmallengines.com/
REDNECK Saw Repair Getter Done

Offline jeff.lary

  • 4 cube
  • **
  • Posts: 37
  • Karma: 5
Re: Source for Partner 500 / 5000 crankshaft seals?
« Reply #4 on: September 21, 2015, 02:15:01 pm »
Ok I will thanks

 

Related Topics

  Subject / Started by Replies Last post
Partner 5000 plus

Started by Cut4fun « 1 2 ... 7 8 » Partner

70 Replies
5861 Views
Last post April 20, 2013, 03:55:54 pm
by Cut4fun .
11 Replies
695 Views
Last post January 17, 2012, 04:17:35 pm
by Cut4fun .
8 Replies
317 Views
Last post March 12, 2012, 05:54:35 pm
by man of stihl
15 Replies
602 Views
Last post September 24, 2013, 07:23:56 pm
by Cut4fun .
0 Replies
606 Views
Last post February 09, 2013, 11:40:42 am
by Cut4fun .
2 Replies
368 Views
Last post February 13, 2013, 06:47:50 am
by Cut4fun .
8 Replies
197 Views
Last post January 22, 2014, 11:23:10 pm
by jockeydeuce
7 Replies
516 Views
Last post August 03, 2014, 09:11:26 pm
by Cut4fun .
3 Replies
344 Views
Last post March 09, 2014, 09:14:28 am
by farmboy
8 Replies
423 Views
Last post December 08, 2014, 01:38:13 am
by Gypo Logger