Author Topic: Big taperlock  (Read 91 times)

0 Members and 0 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Big taperlock
« Reply #10 on: June 02, 2014, 09:57:49 am »
I have opened the gap in the taper lock in cases like this.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Big taperlock
« Reply #11 on: June 02, 2014, 06:03:18 pm »
Pulled it all apart and cleaned/measure the shaft. About .0025 variation in some areas, found a few high spots I filed down.   Degreased with Acetone and 're installed the taperlock with Loctite 680.  Couldn't find 603 but I think the 680 is a good choice. Seated the taper then tightened set screws and repeated, hopefully it works.  I appreciate everyone's input, post a few pics tonight