Author Topic: Crank Bearings - Seals misc cross reference  (Read 168 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17726
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Crank Bearings - Seals misc cross reference
« on: May 19, 2016, 01:15:15 pm »
Sharing info to save in another spot.   Crank Bearings - Seals misc and cross reference

Aaron's Seals/bearings/etc list:

Poulan/PoulanPro

Poulan XXV

-F/W & PTO seals: 530019051. CR/SKF-5510. National/Timken 313156. Victor Reinz 48045. http://m.ebay.com/itm/VICTOR-48045-Seal-Xref-TIMKEN-313156-/301814458131?nav=SEARCH

-Bearings: 530032021. Aftermarket?


Poulan Micro

-F/W & PTO seals: 530019059. Homelite 94638. SKF 4913. Homelite 07025.

-Bearings: 530032058. INA SCH 87




Poulan 3400-4000 & PP375-395

-F/W & PTO seals: 530019097. SKF 6119 for double lip. SKF 6120 for single lip. National/Timken253747.

-Bearings (F/W & PTO): 530032051. Torrington BH-108  Full compliment  (there are caged versions which are different)



Poulan 4200-8510

F/W & PTO seal: 530019075. SKF 6904. National 471466.

-Bearings: 6203 C3 both sides.



Poulan 245/306

-PTO seal: 530001936. Dichtomatik 068091VM (dist by Rankin Industries). .687"x.937"x.135" (OEM measurements). .688"x.938"x.172" (AM measurements. Suitable).

-FW seal: 530019042. CR 5542 or 5541.

-Oil pump seal: 530019035. Dichtomatik 06081SM.

Thread on AS wherein the 245/306 aftermarket seal question was answered:

http://www.arboristsite.com/communit...rments.197286/

-FW side bearing: 530003208. Aftermarket?

-PTO side bearing: 530032011. Aftermarket?


Homelite


Homelite XL-700/800/900 series

-PTO & F/W seals: 12282A (OLD # 58688A). SKF 6119 double lip. SKF 6120 single lip. National 253747. Poulan 530019097.

-FW side bearing: 63195. Torrington DD-38048.

-PTO side bearing: 58190S. 6203 C-3 WITH external snap ring groove near one end. Place grooved end nearest the crank counterweight.

An example of the needed bearing:

http://www.vxb.com/page/bearings/PROD/Kit9771?

 


XL-12/SXL Series

-F/W Seal:12282A (OLD # 58688A). SKF 6119 double lip. SKF 6120 single lip. National 253747. Poulan530019097.

-PTO Side Seal for saws with the auto oiler drivecase with the fill up by the handlebar bracket: 58308B.07021. Aftermarket?

-PTO Side Seal for saws with the manual oiler drivecase and the oil fill down below the muffler: 12282A. SKF 6119 double lip. SKF 6120 single lip. National 253747. Poulan 530019097.
[/B]


-F/W Side Bearing: 58956. Torrington BH-108.

-XL12 PTO Side Bearing: 58956. Torrington BH-108.

-SXL PTO Side Bearing: 58726. Aftermarket?



XL-101 Series

-PTO side seal: 58308A. 07021. 07021.

-FW side seal: 12282B (OLD # 58688A). SKF 6119 double lip. SKF 6120 single lip. National 253747. Poulan 530019097.

-FW side bearing: 63867. Aftermarket?

-PTO side bearing: 63865-S. Aftermarket?



Homelite C/XP/1050/1130 Series

-F/W seal: 58308A. 07021.

-PTO seal: 56256B. SKF 7414.

-FW side bearing: 58190-S. Aftermarket: 6203 C3.

-C and DIRECT DRIVE XP/1050 series PTO side bearing: 63043. Aftermarket: B-1210

-XP1100/1130/1130G GEAR DRIVE series PTO side bearing: 76167-S. Aftermarket?



Homelite 2000/2100/3100G Series

-F/W seal: 58308A. 07021.

-PTO seal: 56256B. SKF 7414.

-FW side bearing: 58190-S. Aftermarket: 6203 C3.

-PTO side bearing: 64958-S. Aftermarket: 6204 C3. Updated 11/28/15



Homelite EZ, 7-19, early 600D, etc

-PTO & F/W seal: 71597 (two per side). Aftermarket?

-FW side bearing: 55204. Aftermarket?

-PTO side bearing: 55193. Aftermarket?



Homelite 600D/Zip/Wiz/700-775D/G,etc

-FW & PTO seal: 56134. Aftermarket?

-FW side bearing: 57533. Aftermarket?

-PTO side bearing: 56097-S. Aftermarket?



Homelite 9-series (9-23 through 995G)

-FW side seal: 56134. Aftermarket?

-PTO side seal: 56256. Aftermarket?

-FW side bearing: 56255. Aftermarket?

-PTO side bearing: 56261-S. Aftermarket?



Homlite E-Z/Super E-Z/XL-1/etc

-PTO & FW seal: 94638. 07025. old # 65819. SKF 4913. Poulan 530019059.

-FW side bearing: 65179. Aftermarket?

-PTO side bearing: 65044-S. Aftermarket?



Homelite 450/550

-Seals: 12306. Aftermarket?

-Bearings: 63195. Aftermarket?



Homelite 650/650E

-PTO seal: 12306. Aftermarket?

-FW seal: 12282A. Poulan 530019097. SKF 6119 for double lip. SKF 6120 for single lip. National/Timken 253747.

-FW side bearing: 63196 (May be wrong. IPL is blurry. Help please.). Aftermarket?       Is   63195
-PTO side bearing: 63196. (May be wrong. IPL is blurry. Help please.). Aftermarket?     Is   63195
Clear IPL    http://www.leonschainsawpartsandrepair.com/uploads/3/9/7/9/39792537/homelite_650_chainsaw_ipl_24836_2.pdf



Homelite 750/Super 650

-PTO seal: 12306. Aftermarket?

-FW seal: 53444. 71110. POSSIBLY SKF 7410. Updated 11/28/15

-FW side bearing: 70844. Aftermarket?

-PTO side bearing: 70409-A. Aftermarket?

Homelite XL2/Super2/240/etc

-FW & PTO seals: 94638. 07025. Old # 65019. Use Poulan/Husqvarna 530019059 or SKF 4913. Same seals as Poulan Micro series and Homelite E-Z/Super E-Z.

-Bearings: 12530. Aftermarket?


Homelite 8-29, etc

-Crank Seals 71110. SKF 7410. Updated 11/28/15



McCulloch


Mac 10-series. CHECK IPL for different bearings and seals for some models. PM10-10S, 1-10, and some others.

-F/W seal: 61618. Most saws. National 471551.

-F/W seal: 67906. PM10-10S and a few others. Aftermarket?

-PTO seal: 110260. SKF 6119 double lip or SKF 6120 single lip. Poulan 530019097. National 253747.

-FW side bearing for most saws: 63429B. Aftermarket?

-FW side bearing for PM10-10S. Maybe others: 67905. Aftermarket?

-FW side bearing for some 1-10 saws. Maybe others: 110348. Aftermarket?

-PTO side Bearing: 104357. Torrington BH-108.

Front Tank Mac

-Open piston pin bearing: Koyo B-88.

-Closed piston pin bearing: Koyo M-871.

-FW seal: 50663. SKF/CR 6763. Possibly also SKF 6522 (unconfirmed)

-PTO seal for ball bearing saws: 104432. SKF 6640. SKF 6816.

-PTO seal for needle bearing saws: 104128. SKF 7414.

-FW Bearing: 100824. POSSIBLY the same as 66016 as used on the top tank saws....and POSSIBLY 6203 C3. Will investigate.....

-PTO Bearing for ball bearing saws: 100824. See above.

-PTO Bearing for needle bearing saws: 104129.

Top Tank Mac

-F/W inner seal: 57898. Aftermarket?

-F/W outer seal: 57897. Aftermarket?

-PTO seal: 104432 or 104486. SKF 6640. SKF 6816.

-Bearings: 66016. IIRC they are 6203 C3 bearings. Will confirm /update.



Pioneer/Pioneer-Partner/PoulanPro


PoulanPro 405/455/525/655 series AND
Pioneer/Pioneer-Partner Large frame P-40/41/42/50/51/52/60/61/62/65, Farmsaw, 1074, P26E, P28E

-PTO and F/W seals: Pioneer 428746. Use Poulan 507428746   [Color="Green"]SKF CR 5606, National (Timken) 472705 both double lip nitrile or SKF CR 5425 double lip Polyacrylate Updated Mar 22/16[/COLOR]

-Bearings:

Pioneer IEL RA & HC

-PTO seal: Pioneer 425077, Cross to CR6582.

-F/W seal: Pioneer 425076. Cross to CR6541.

-Bearings:

Pioneer 700/750/850

PTO & FW seal: Pioneer 425076. Cross to CR6541.

-Bearings:

Pioneer 425076---CR6541
Pioneer 425077---CR6582

One of each for the RA, 600 series, J series, and 800.
Two of 425076 for the 700/750/850/17xx/18xx (The gear drives use a 3rd seal for the sprocket output shaft.)

All of the above saws use a pair of 6203 bearings. (Again, except the gear drives which use 5 of those bearings.)

 Canadiens use the small seals and 6203 bearings for the most part



Husqvarna 42/44/234/238/242/246/444 Series

-FW side Seal: 503501501. Still available for now.  Aftermarket?

-PTO Side Seal: 501614901 or 503504301.  Obsolete.  Aftermarket?

-FW Side Bearing: 738220125. Still available from Husky.  Aftermarket?

-PTO Side Bearing: 501594002.  Obsolete. Aftermarket?

-Oiler Outlet Grommet: 501624301.

-Carb Base Gasket: 501862502 or 501862501.

-Intake Gasket: 501862102 or 501862101.



Husqvarna 154SE/254XP/257/262XP/261

-Crank Seals: 505275719 or 503260601. Shared with 50-55, 357/359, 362-372.  Aftermarket?

-Bearings: 738220225. Shared with MANY saws.  6302 C3.

-FW Side Seal Carrier O-Ring: 740482702.

-Oiler Outlet Grommet: 501624301.

-Carb base gasket: 501862502.

-Intake Gasket: 261/262 503544301.

-Intake Gasket: 154/254/257 501862102 or 501862101.


Husqvarna 61-272XP

-FW & PTO seals: 503 26 02-04. National 15X26X6 metric seal (double lip like OEM). The size is the part #. I couldn't find an SKF that was 6mm wide. 7mm was the smallest in 15X26


-Oil Pump O-Ring: 740 42 21-00. Use OEM.

-Bearings: 738220225 6202 C3 both sides.

Husqvarna 181SE (late) 281XP 288XP.

-FW & PTO seals: 503 26 02-05. Aftermarket?

-Oil Pump O-Ring: 740 4224-00. Use OEM.

-Bearings: 6203 C3 both sides.

Early 181SE

-FW seal: 503 26 02-04. Aftermarket: National 15X26X6. Same as 61-272 series.

-PTO seal: 503 26 02-05. Same as 61-272 series. Aftermarket?

-Oil Pump O-Ring: 740 4224-00. Use OEM.

-PTO Side Bearing: 6203 C3

-FW Side Bearing: 738220225. 6202 C3. Same as 61-272 series. Corrected 9/24/15

Husqvarna 1100CD 2100CD 298XP 2101XP

-FW & PTO seals: 503 26 02-05.

-Bearings: 6203 C3 both sides.

-Oil pump o-ring: 740422200. Use OEM.


Husqvarna 346XP/351/353

-FW Side Seal: 505275719 or 503260601. Aftermarket?

-PTO Side Seal: 505416101 or 503260901. Aftermarket?  Better to replace as a bearing/seal assembly. See below.

-FW Side Bearing:738220225. 6202 C3.

-PTO Side Bearing/Seal Assembly: 525434201 or 503252002 or 505416001.

-Intake Boot: 503866302 or 503866301.

-Updated Intake Partition/Clamp: 537251302.


Husqvarna 357XP/359

-Crank Seals: 505275719 or 503260601. Shared with many models.  Aftermarket?

-Bearings: 738220225. 6202 C3.

-Intake Boot: 503928702 or 503928701.

-Updated Intake Partition/Clamp: 537251302.


Husqvarna 362-372XP

-FW Side Seal: 505275719. Aftermarket?

-PTO Side Seal: 503260301.  Aftermarket?

-Bearings: 738220225. 6202 C3.

-Intake Boot Clamp Type:  503964501.

Intake Boot Bolt Type: 503743901.

-Crank Sleeve O-Ring: 503263019.


Husqvarna 385XP/390XP

-FW Side Seal: 503260205.  Same as 181-288, 394/395, 285-2101.

-PTO Side Seal: 503262201

-FW Side Bearing: 738220325  6203 C3.

-PTO Side Bearing Without Seal: 738220325 6203 C3.

-PTO Side Bearing/Seal Assembly: 503251301.

-Intake Boot: 537111402.


Husqvarna 394/395XP

-Bearings and Seals: Same as 181SE-288XP


Alpina 90/120 Updated 11/28/15.

-Crank Seal: 17-32-7adl-nbr

-Crank Seal: 17-35-7adl-nbr
 
 
Jonsered(s) 630 Early and Late

-Crank Seals both sides: Husqvarna 503 26 02 04. National 15X26X6 metric seal (double lip like OEM).


Jonsereds 801

-Crank Seals both sides:  Husqvarna 504 14 62-00.  National 15X30X6.
 



General Reference


Good source for Homelite IPL's and parts:

http://www.leonschainsawpartsandrepair.com/parts-diagrams.html

http://www.leonschainsawpartsandrepair.com/store/c1/Featured_Products.html


Good source for IPL's.  Several manufacturers:

http://www.barrettsmallengine.com/partslists.html



SKF Seal Catalog/Handbook. GOOD, useful info.

http://www.iptequipos.com/catalogos/...%20Retenes.pdf

http://www.applied.com/

SKF Seal Lookup Utility by Size:

http://www2.chicago-rawhide.com/popu...kup_457010.htm

SKF/CR Seal Interchange Utility. Type in OEM # or other industry # and hopefully get back a good SKF/CR number.

http://www2.chicago-rawhide.com/popu...kup_457012.htm


Motion Industries. Good place to get seals:

http://www.motionindustries.com/moti...es%3EOil+Seals

Garlock seals catalog PDF:

http://www.allsealsinc.com/klozure_catalog.pdf

REDNECK Saw Repair Getter Done

Social Buttons


 

Related Topics

  Subject / Started by Replies Last post
15 Replies
596 Views
Last post September 24, 2013, 07:23:56 pm
by Cut4fun .
40 Replies
402 Views
Last post December 21, 2015, 01:14:28 pm
by Tor R
2 Replies
141 Views
Last post October 27, 2013, 09:09:17 am
by brokenbudget
18 Replies
374 Views
Last post November 11, 2013, 09:19:48 am
by KilliansRedLeo
Crank Bearings

Started by farmboy « 1 2 » Husqvarna

10 Replies
245 Views
Last post January 21, 2014, 02:30:55 pm
by 05_sprcrw
Crank bearings

Started by jmester « 1 2 » Stihl

12 Replies
189 Views
Last post July 24, 2015, 07:14:47 pm
by 67L36Driver
4 Replies
155 Views
Last post November 03, 2015, 02:20:23 pm
by exSW
4 Replies
188 Views
Last post March 10, 2016, 11:06:21 am
by 660magnum
3 Replies
173 Views
Last post March 18, 2016, 09:02:35 am
by Jason K
3 Replies
347 Views
Last post February 11, 2017, 03:39:09 pm
by Cut4fun .