Author Topic: Tygon 1100 1200 1300 4040 True Blue Echo oem fuel line  (Read 2268 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #110 on: December 21, 2015, 05:05:32 pm »
@DefinitiveDave  what was that Oregon fuel line you put in the first gift box with the other lines.  It is stiffer like some of these newer lines.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #111 on: December 23, 2015, 12:49:28 am »
That was the Oregon branded line that's rated for up to 30% ethanol.

For example:
http://www.amazon.com/gp/aw/d/B0018U248M/ref=mp_s_a_1_3?qid=1450849623&sr=8-3&pi=AC_SX110_SY165_QL70&keywords=oregon+fuel+line


OK break's over.  Back inside for another hour...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Like Like x 1 View List

Offline Moparmyway

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 45
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #112 on: December 23, 2015, 03:37:10 am »
That was the Oregon branded line that's rated for up to 30% ethanol.

For example:
http://www.amazon.com/gp/aw/d/B0018U248M/ref=mp_s_a_1_3?qid=1450849623&sr=8-3&pi=AC_SX110_SY165_QL70&keywords=oregon+fuel+line


OK break's over.  Back inside for another hour...

The more I use that line, the more that I like it
Like Like x 1 View List

Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #113 on: January 03, 2016, 06:22:21 pm »
well fiddlesticks I zoned out before the part of the thread where it turns out the stuff I got might not suck after all, I haven't been recommending it to guys because I thought "fire good - tygon bad - Frankenstein hungry"
It is also on the pricy side, which is fine if it is good stuff, not so much if it turns to goo in fuel.
I got to pay more attention
Dave
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components
Funny Funny x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #114 on: January 04, 2016, 03:28:19 am »
Dave fear not.  The stuff you sent me has been working well so far.  Of course........I run zero-eth fuel.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Funny Funny x 1 View List

Offline DefinitiveDave

  • 5 cube
  • ***
  • Posts: 89
  • Karma: 24
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #115 on: January 04, 2016, 06:51:31 am »
zero eth is cheating man :)
that's like saying your Subaru can handle literally any terrain....because you welded it to the top of an Abrams M1
Dave
seeking new in box 046, standard or arctic model



Ebay Store: http://stores.ebay.com/Chainsaw-Conservation-Components
Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #116 on: January 04, 2016, 03:19:35 pm »
LOL
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #117 on: May 28, 2016, 11:15:21 am »
That was the Oregon branded line that's rated for up to 30% ethanol.

For example:
http://www.amazon.com/gp/aw/d/B0018U248M/ref=mp_s_a_1_3?qid=1450849623&sr=8-3&pi=AC_SX110_SY165_QL70&keywords=oregon+fuel+line




Put this in the return lines of 2 mini tillers yesterday. 

Thanks Dave for the line to test you sent back then.

Ethanol 93  with Klotz KL-200 still 32:1
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #118 on: May 31, 2016, 09:43:19 am »
Put tygon 1200 line from the tank to carb on the new to me older craftsman mini tiller.  So have 2 different ones to watch now side by side. 
That new oregon 30% and the tygon 1200
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #119 on: June 29, 2016, 05:02:06 pm »
I still havent figured out what the poulan 4218 had for oem line that did this.

But I also just found a poulan 2700 that did this. Looking back at the thread I am thinking I might have used tygon 1100 but not real sure if I ended up replacing that afterwords. What ever I had in it the lining separated on the tank vent and fuel line.
Had white letters and said mfg in saint gobain I think I could make out.

Took pics. Will load later of 2700 line.  Replaced today with the blue stens for fuel and afm echo vent line.

4218
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
18 Replies
4318 Views
Last post March 26, 2017, 05:46:32 pm
by Cut4fun .
2 Replies
388 Views
Last post August 26, 2013, 01:39:22 pm
by Bluegill
15 Replies
832 Views
Last post May 01, 2014, 10:58:35 am
by 660magnum
8 Replies
389 Views
Last post November 20, 2014, 09:03:44 pm
by Nathaniel Vansickle
19 Replies
229 Views
Last post February 02, 2016, 09:07:17 pm
by Cut4fun .
0 Replies
283 Views
Last post September 23, 2015, 07:51:04 pm
by Cut4fun .
25 Replies
340 Views
Last post November 07, 2015, 07:25:01 pm
by treeslayer2003
3 Replies
257 Views
Last post January 09, 2016, 11:46:21 am
by dannyupsolate
1 Replies
291 Views
Last post February 10, 2017, 12:46:24 pm
by huntindog1
4 Replies
513 Views
Last post October 02, 2018, 04:32:25 am
by waltergorman