Author Topic: Tygon 1100 1200 4040 True Blue fuel line  (Read 1007 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17730
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #50 on: July 04, 2015, 11:09:48 am »
Good to know and thanks for listing lines.

Link Stens True Blue fuel line.  http://www.stens.com/true-blue-fuel-line
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17730
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #51 on: July 07, 2015, 12:30:19 pm »
Got a surprise yesterday, there was true blue in with the tygon 1200. 

See what they are saying about stiff.  True blue feels like the easier one to work with.

Will get pic later in micro.

REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 424
  • Karma: 79
  • Location: Newcomerstown ,Ohio
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #52 on: July 07, 2015, 01:36:54 pm »
http://performanceoutdoorequipment.com/search?q=tygon&x=0&y=0

i like the feel of the true blue better but until someone makes it in .080 x .140 i wont be using much of it.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17730
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #53 on: July 07, 2015, 05:43:19 pm »
3/16 in LP-1200 and True Blue.

080 x 140 LP-1200

REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #54 on: July 25, 2015, 02:49:07 pm »
How does the 1200LP compare to the 1100LP?  That True Blue is interesting.  It's good to have more options.  They do need to make more sizes however.  .080 x .140 and .117 x .211 would be good additions.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 327
  • Karma: 28
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #55 on: August 06, 2015, 04:43:27 pm »
got my 3/16 true blue in from  18.95  guy on fleabay should know in about a year if it is good.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17730
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #56 on: August 06, 2015, 04:56:07 pm »
How does the 1200LP compare to the 1100LP?  That True Blue is interesting.  It's good to have more options.  They do need to make more sizes however.  .080 x .140 and .117 x .211 would be good additions.

Aaron I cant remember sorry, 1200 compared to 1100. But the 1200 is super ssssssstiff. 



got my 3/16 true blue in from  18.95  guy on fleabay should know in about a year if it is good.

Cool keep us updated on long term.




Wishing for trublue in .080 x .140
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #57 on: August 06, 2015, 09:47:58 pm »
1100LP was pretty damn stiff.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17730
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #58 on: August 07, 2015, 12:37:24 pm »
1100LP was pretty damn stiff.

Times that by 2.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2032
  • Karma: 197
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tygon 1100 1200 4040 True Blue fuel line
« Reply #59 on: August 08, 2015, 01:04:31 am »
Damn.  I was hoping the 1200 was going to be more pliable than the 1100...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
18 Replies
3063 Views
Last post March 26, 2017, 05:46:32 pm
by Cut4fun .
2 Replies
302 Views
Last post March 28, 2012, 12:27:35 pm
by nmurph
11 Replies
585 Views
Last post October 30, 2016, 09:16:26 am
by Sty57
6 Replies
574 Views
Last post January 11, 2013, 05:01:34 pm
by Cut4fun .
8 Replies
235 Views
Last post February 23, 2013, 01:45:54 am
by dutchsawdoctor
2 Replies
204 Views
Last post August 26, 2013, 01:39:22 pm
by Bluegill
38 Replies
536 Views
Last post November 30, 2015, 03:40:50 pm
by dynodave
15 Replies
756 Views
Last post May 01, 2014, 10:58:35 am
by 660magnum
19 Replies
144 Views
Last post February 02, 2016, 09:07:17 pm
by Cut4fun .
3 Replies
198 Views
Last post January 09, 2016, 11:46:21 am
by dannyupsolate