Author Topic: Tygon 1100 1200 1300 4040 True Blue Echo oem fuel line  (Read 2268 times)

0 Members and 1 Guest are viewing this topic.

Offline Chucky2

  • 3 cube
  • *
  • Posts: 8
  • Karma: 1
Re: Tygon LP-1300?
« Reply #150 on: March 23, 2019, 05:57:42 pm »
Hi Cut4Fun,

First, my saw is a Poulan 3400.

I'm finally getting around to this now that weather is nice enough here.  Looking back from when we re-did the fuel line and carb, I was asking Tygon about needing 1/8 ID x 3/16 OD, so that's what would be stock.

Thing is, that site you get your line from has Echo line in mm.  The closest I can see is 3mm by 5mm.  Using Google conversion calc, 1/8 = 3.175mm and 3/16 = 4.7625mm.  My questions are:

1.) If the ID is 3mm and I should have 3.175mm, is that going to be too tight when I put it on carb and vent (duckbill)?

2.) If the OD is 5mm and I should have 4.7625mm, am I going to have to enlarge the tank holes? This isn't a large problem I can always drill it out just wondering if you've ever needed to do this?

For anyone reading this thread, still no mention of Tygon LP-1300 online as of today...

 

Related Topics

  Subject / Started by Replies Last post
18 Replies
4318 Views
Last post March 26, 2017, 05:46:32 pm
by Cut4fun .
2 Replies
388 Views
Last post August 26, 2013, 01:39:22 pm
by Bluegill
15 Replies
833 Views
Last post May 01, 2014, 10:58:35 am
by 660magnum
8 Replies
389 Views
Last post November 20, 2014, 09:03:44 pm
by Nathaniel Vansickle
19 Replies
229 Views
Last post February 02, 2016, 09:07:17 pm
by Cut4fun .
0 Replies
283 Views
Last post September 23, 2015, 07:51:04 pm
by Cut4fun .
25 Replies
340 Views
Last post November 07, 2015, 07:25:01 pm
by treeslayer2003
3 Replies
257 Views
Last post January 09, 2016, 11:46:21 am
by dannyupsolate
1 Replies
291 Views
Last post February 10, 2017, 12:46:24 pm
by huntindog1
4 Replies
513 Views
Last post October 02, 2018, 04:32:25 am
by waltergorman