Chainsaw Repair

Nate has to websites and is in Ohio and dealer

new https://www.performanceoutdoorequipment.com/

I get around the older site better   https://performance-outdoor-equipment.myshopify.com/

I use the black oem echo lines https://performance-outdoor-equipment.myshopify.com/collections/carburetor-and-fuel?page=3

Hi Cut4Fun,

First, my saw is a Poulan 3400.

I'm finally getting around to this now that weather is nice enough here.  Looking back from when we re-did the fuel line and carb, I was asking Tygon about needing 1/8 ID x 3/16 OD, so that's what would be stock.

Thing is, that site you get your line from has Echo line in mm.  The closest I can see is 3mm by 5mm.  Using Google conversion calc, 1/8 = 3.175mm and 3/16 = 4.7625mm.  My questions are:

1.) If the ID is 3mm and I should have 3.175mm, is that going to be too tight when I put it on carb and vent (duckbill)?

2.) If the OD is 5mm and I should have 4.7625mm, am I going to have to enlarge the tank holes? This isn't a large problem I can always drill it out just wondering if you've ever needed to do this?

For anyone reading this thread, still no mention of Tygon LP-1300 online as of today...

Yes, helped.  Of course I waited too long and the 3x5 black is not available.  Going to contact him to see if that is permanent and/or if he has shorter pieces (I need a 12-13" not 26' or whatever it is lol).  If he doesn't have it I'll look on Amazon using his part number...

Thanks again for the help!

That would be awesome, thanks!  I will PM you my address and to get a paypal addy for you.

Got it, thanks!  Now gotta order another carb rebuild kit, who knows how much crap I sucked up using w/o a filter...freaking Ethanol...