Chainsaw Repair

Well I have been working on this Poulan 3500 for a little while now and have it all put back together.   I did not do a pressure test on the crankcase but I will find out when I go to run it if there is a problem.   The seal on the flywheel side is the one I cut down from a SKF 5966 and the seal on the PTO side is an OEM seal that I had.
I did not want to use the all rubber seal after finding out the spec was only to 6 psi.   Here are few pics.
I cleaned the ports up some but nothing serious as far as they go.   Will and try and run it soon to see how it does.  This is just like my 365 but in green.