Author Topic: Poulan 3500 3600 3350  (Read 2952 times)

0 Members and 1 Guest are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: 3500
« Reply #10 on: February 17, 2013, 02:42:15 pm »
I was looking for 365 3300 stuff today and stumbled across a non running parts saw. I'm guessing a 3500 3600 or maybe even a 3350 I have never seen before. 

Have way to much in it for full out repair  if needed, but  figured parts is parts.



I saw that listing, but resisted.:D
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #11 on: February 23, 2013, 09:04:27 am »
Just starting a thread on the 3500 to save info in.  So is there 54cc and 60cc 3500  saws?

I'll be trying to dig some of the 3500 post pot of the 330 3450 thread to add here too.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #12 on: February 23, 2013, 09:19:08 am »
Poulan 3350 3500 3600 numbers to compare to others below.

 
530069546 3350 piston

530069549 3500 & 3600  piston

530030176 3350 rings

530036176 3500 & 3600 rings


530030176 Piston Ring Model 3450 T1,T2,T4
   
530036176 Piston Ring Model 3750 T1 & T2 3450 T3


530071321 Piston Kit Model 3450 T1,T2,T4
   
530069549 Piston Kit Model 3750 T1 & T2, 3450 T3

530071321 Piston Kit  Poulan 330 54cc
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #13 on: February 23, 2013, 09:21:32 am »
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #14 on: February 23, 2013, 09:23:44 am »
Going by IPL I am only seeing 60cc 3500 P+C. No 54cc 3500 offered on 3500 ?? 
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 3500
« Reply #15 on: February 23, 2013, 11:28:25 am »
That IPL picture doesn't show the cylinder you have for your cylinder has vertical fins across the top and the IPL shows a flat top cylinder but that doesn't mean a whole lot from my experience with IPL's.

Time to put a popsicle stick in the exhaust port and see what your bore is?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #16 on: February 23, 2013, 11:34:11 am »
Good catch. Notice your cylinder has fins up and this new to me one does too.  I can find nothing about a 3500 being 54cc, only 60cc 3500's.
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 3500
« Reply #17 on: February 23, 2013, 12:14:29 pm »
I cannot either. Where's Mark?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Poulan 3500
« Reply #18 on: February 23, 2013, 02:06:19 pm »
All my research on 3500 says 60cc but I didn't know there wasa a 3450 Bad Boy either.  My 2-3500's and 365 are 60cc.
Shep

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3500
« Reply #19 on: February 23, 2013, 05:28:14 pm »
Type 1 measured bore 49mm and top end was sweet still. Could see witness lines on piston and single ring.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
537 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1188 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
111 Replies
1292 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
Poulan 3500

Started by 3000 FPS « 1 2 3 4 5 » Poulan

49 Replies
823 Views
Last post May 11, 2016, 09:21:16 pm
by 660magnum
4 Replies
148 Views
Last post November 22, 2015, 11:58:01 am
by Cut4fun .
3 Replies
236 Views
Last post November 22, 2015, 09:29:47 am
by SquareFile
2 Replies
214 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
210 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .
2 Replies
142 Views
Last post January 27, 2018, 11:37:07 pm
by farmboy
3 Replies
105 Views
Last post August 07, 2018, 03:53:25 pm
by Cut4fun .