Author Topic: Poulan 3500 3600 3350  (Read 9826 times)

0 Members and 45 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #110 on: April 01, 2017, 02:00:23 pm »
I threw the carb from the PP365 I used to have but sold the crankcase from it on the 3500.  I was just finishing up all the lines etc when the guy showed up.

I let him run the 3500 60cc after I fine tuned it and the 3450 54cc I fine tuned yesterday with 3/8 setups in 20" on both.   I explained the differences etc and told him your call after running them. After he told me his choice I told him that would be the one I would have chosen too.

Gave him a poulan 1gal 2 stroke mix 3.2oz for 40:1 and he left grinning ear to ear.

Sent out full of bar oil and fuel mix.

Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Poulan 3500
« Reply #111 on: April 01, 2017, 02:19:01 pm »
Ok Ok so which one did he choose.
PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #112 on: April 01, 2017, 02:42:04 pm »
 :-[

Oops 3500 
Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #113 on: April 01, 2017, 05:28:42 pm »
I had priced this 3500 to a member here for $150 last fall PHO with me not having to go through it. But never seen the $.


So here is what the other $50 got the new owner. New chain 20", like new bar. new spark plug bosch. New fuel line, new fuel filter, new airfilter, new impulse line, new tank vent line and duckbill valve, new 3/8 7T rim. Saw gone through checked over on every detail. Changed carbs out to my known good carb.
$200 with hands on instructions and how to file chain shown hands on and list of how to's and what to get. Told any issue ad bring it back pronto.

He also had choice of short or long dawg etc. Also choice of front or side exit mufflers.
 

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Poulan 3500
« Reply #114 on: April 01, 2017, 06:07:24 pm »
I had priced this 3500 to a member here for $150 last fall PHO with me not having to go through it. But never seen the $.


So here is what the other $50 got the new owner. New chain 20", like new bar. new spark plug bosch. New fuel line, new fuel filter, new airfilter, new impulse line, new tank vent line and duckbill valve, new 3/8 7T rim. Saw gone through checked over on every detail. Changed carbs out to my known good carb.
$200 with hands on instructions and how to file chain shown hands on and list of how to's and what to get. Told any issue ad bring it back pronto.

He also had choice of short or long dawg etc. Also choice of front or side exit mufflers.
 

You know for someone who uses a saw but does not know a lot of about them that 3500 for that money is a good way to go.    I have plenty of saws and every year when I go to the mountains it is the Poulans that I take with me because I know they are dependable.   
PP 505, 475, 445.
Like Like x 1 Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #115 on: April 17, 2017, 04:50:55 pm »
Another 3500 ready to close up. All new 3mm x 6mm fuel and impulse echo lines. 


Offline old 040

  • 4 cube
  • **
  • Posts: 71
  • Karma: 18

  • Total Badges: 23
    Badges: (View All)
    Eighth year Anniversary Level 5 Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary
Re: Poulan 3500
« Reply #116 on: April 21, 2017, 06:09:32 am »
Sorry Kev, but I already snagged it!, super clean low hour 3600 and was listed on c-list close by, a first in this series for me and feels like a real good runner, these just don't show up around me...... ;D
Like Like x 3 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #117 on: April 21, 2017, 01:34:18 pm »
Sorry Kev, but I already snagged it!, super clean low hour 3600 and was listed on c-list close by, a first in this series for me and feels like a real good runner, these just don't show up around me...... ;D

Must have not been up for long before you snagged it ;). Was to far for me.   

Nice one!!

POULAN 3600 Timbermaster chainsaw 3.7ci engine with 20" roller nose bar in very good working condition starts runs and cuts great. Recently serviced new fuel lines and rebuilt carburetor.
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Poulan 3500
« Reply #118 on: April 21, 2017, 05:28:29 pm »
Nice saw Old 040.   I wonder what the difference is between the 3600 and 3500 are.   They sure look the same.   Both 60cc.
PP 505, 475, 445.
Like Like x 1 Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan 3500
« Reply #119 on: April 21, 2017, 10:23:14 pm »
Poulan 3350 3500 3600 IPL.  http://www.poulan.com/ddoc/POUI/POUI2000_USen/POUI2000_USen__530068641.pdf

Nothing I know of between 3500 3600 diff.  Anyone?

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1296 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
120 Replies
5368 Views
Last post October 07, 2023, 08:09:15 am
by Cut4fun
4 Replies
470 Views
Last post November 22, 2015, 11:58:01 am
by Cut4fun .
3 Replies
563 Views
Last post November 22, 2015, 09:29:47 am
by SquareFile
2 Replies
482 Views
Last post January 27, 2018, 11:37:07 pm
by farmboy
3 Replies
451 Views
Last post August 07, 2018, 03:53:25 pm
by Cut4fun .
2 Replies
328 Views
Last post July 06, 2019, 09:09:05 am
by joe_indi
0 Replies
206 Views
Last post February 13, 2021, 08:08:23 am
by Cut4fun
0 Replies
192 Views
Last post March 03, 2022, 10:55:02 am
by Cut4fun .
16 Replies
745 Views
Last post February 03, 2024, 06:26:08 pm
by The Ripper